1 / 2
RFID badgereader
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A part from the rfid reader chip, I used 10 jumper cables with heath shrink tube around to leave trough the hole, one 3-way jumper splitter to connect the two flat head leds (5mm) with the ground pin of the reader chip. You can print a tpu seal (see models) ore use a standard O-ring 2.4 CS x 92 OD (mm)