Shop-Vac Handle Low Profile Replacement (Model# SL14-600C)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement handle for a SL14-600C Shop-Vac. Low profile to help the vacuum slide under low tables.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a replacement/modification handle for Shop-Vac's SL14-600C, 12 gallon, 6 horsepower vacuum. It is lower profile than the OEM handle. This allows it to slide under a table I built that it couldn't fit under with the OEM handel.
Print with 4-5 walls, and 10%-20% infill. Make sure you're printing a little hot and use low cooling on the upper third of the print to improve layer adhesion since the layer adhesion helps keep it from breaking along the layer lines when you install. Reuse the original screws but don't over tighten them.