Commander Deck Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is a deck box for storing your Magic: The Gathering Commander deck.
Features:
An open slot in the front for a slide card case (mini snap) to display your commander
One large slot in the center to store 99 sleeved MTG cards
One smaller slot in the back for storing tokens
Printing Instructions:
I have included all parts in STl and 3mf formats. I have also included STEP files to make it easier to customize the box. You will need to print one lid. Then print one of the three bottoms. Each bottom has a different-sized deck slot. (62 mm, 58 mm, 54 mm). The size you choose should squeeze the deck a little to help remove air and resist curling.
54 mm fits 99 sleeved cards
62 mm fits decks with a lot of proxies
Recommended settings for the lid and the bottom
Minimum of 3 walls
Minimum of 3 top and bottom layers
Infill can be whatever you prefer, but should not be 0%
The lid should be printed on its top
Confirm to work in PLA and PETG
Assembly and Use:
For a full assembly, you will need a slide card case, a bottom, and a lid. The lid is the only part that requires extra steps after printing. Towards the back of the lid, you will find two tabs. Press both tabs inward firmly to break them free. These are print-in-place springs that help keep the lid on.
The lid attaches by placing the front pegs into the channels to the left and right of the deck. With the lid sitting on the brim, slide the lid straight forward.