HDZero Goggle 2 Prescription Lens Insert Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement insert frame for a prescription lens for the HDZero Goggle 2s.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
This is a replacement frame for the prescription lens inserts that you can buy via the HDZero website. Somehow the tabs on mine broke off while my goggles were in their case. I couldn't find an easy replacement so I modeled one. Note that the lens is just press fit in the OG lens frames, and should pop out with some gentle force (make sure to use a cloth so you don't scratch your lenses).
Print tab side up, no supports needed. I printed in Prusament PLA with the default profile but I suspect PETG or even TPU would work fine.
Note: this design is slightly different than the original, in theirs the lens snaps in from the opposite side of the tabs. In my design it snaps in the same side for ease of printing. Everything should just go together easily. I got a satisfying snap when I pressed my lens into the frame and it is holding well.