Search results: hdzero

HDZero Whoop (Original) VTX protector

Cover for an original HDZero Whoop VTX. Break off tabs and put over VTX, print retains MIPI and U.FL

hdzero eco and lux cam mount whoop

hdzero cam mounts for the eco and the lux

OpenIPC Radxa Zero 3W VRX case -- 3x EU RX cards w/ HDZero rail mounting

A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.

HDZero Box Pro Protective case

Case to protect your HDZero Box Pro. As an addition you can also store a VRX inside this box. The VRX space is designed for the RunCam WiFiLink VRX (please try OpenIPC or RubyFPV!) But a Walksnail VRX will probably also fit. The Inlay and…

HDZero HALO ELRS Arm Mount B-Line Forty5

arm mount for the chonky ELRS antennas that come with the HDZero Stack. made for the B-Line Forty5.

HDZero DFR 2S 4800Mah Liion Cover

HDZero DFR 2S 4800Mah Liion Cover

HDZero Echo patch mount for HDZero Goggles

There are two different mount versions for printing in TPU and hard plastics (ABS/PETG/PLA etc.). The difference is the cutout on one side of the mount. You can not fit TPU version if it is made of hard plastic because of goggle's…

Hdzero Joker racing canopy Lux and Eco

I really liked the Joker canopy on my analog whoops so i remixed them. New versions for the HDzero Eco and HDzero Lux cam. Lightweigt , Eco version printed in tpu95A is 0,7 gr the lux version is a little bit more. Adjustable angles ,…

HDZero Race v3 top plate insulator

print tpu

HDZero Goggles Walksnail Ascent VRX Mount

This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in…

It's FPV Era VTX Protection/Holder for HDZero Freestyle V2

This is a cage I created for the HDZero Freestyle V2 VTX to be mounted on the Era frame of itsfpv. It might work with other frames. The cage is compatible with antenna/GPS holders at the back of the frame. I created it in two parts, so…

HDZero Goggle 2 Prescription Lens Insert Frame - for Fatshark Style

These inserts let you fit the FatShark-sized/DIY prescription lenses onto the goggles! Lenses should be sized or cut to 24.5 × 17.7 mm. Print with the clips facing up, with support for the lens insert area. Pop the frame over the display.…

Skyzone SteadyView X Module Cover for HDZero Expansion Module

Module Cover for Skyzone SteadyView X. For proper contact you must extend the module pins a little bit. Use TPU! I think PLA, ABS or PETG wont fit. Material: TPU 95A Layer heigt: 0.2mm Infill: 90% Support: True

HDZero Whoop (Original) VTX protector

Cover for an original HDZero Whoop VTX. Break off tabs and put over VTX, print retains MIPI and U.FL

Ultra light HDZero ECO cam mount

Light weight ECO cam mount at 45 degrees for your tinywhoop. Printed using PP - not tested with other materials. Update 2024-9-30: Users reported they successfully printed the model using TPU, weight increased with 0.1g compared to PP.…

HDZero Goggle Expansion Module Back Cap

Since the protective Kapton tape started to peel after a few times attaching and detaching the module I designed this part to close the back side. I printed it in TPU and pressed it in. You might also want to check out my other models for…

HDZero Goggle Expansion Module Clip Hole Cap

Print it 4 times in TPU and press them in. Depending on your printers calibration you might need to scale it up or down a few percent. You might also want to check out my other models for the HDZero Goggles:…

HDZero Goggle Expansion Module Pin Header Cap

You might also want to check out my other models for the HDZero Goggles: https://www.printables.com/model/1009854-hdzero-goggle-expansion-module-back-cap https://www.printables.com/model/1013045-hdzero-goggle-expansion-module-clip-hole-cap

hdzero lux canopy

Based on my design for the eco camera, I developed the lux version as well. Please let me know if you'd like more angles and any modifications. Link to the eco version:…

HDZero Clip Holder

My goggle clip broke, making the goggles unusable. I’ve designed a replacement clip that fits perfectly with my goggles. I’m providing two versions: one that closely resembles the original and another that is thicker for added durability.…

HDZero Lite / Runcam Nano 3 Whoop Camera Mount w/Hood (Adjustable Angle)

Remixed HDZero Lite Whoop Camera Mount (Adjustable Angle) by MrShutterBug to include a hood for a little added lens protection. High - HDZero Lite Lens Med - HDZero Lite Lens (glued like in MrShutterBug's video - less surface area to hold…

hdzero eco and lux cam mount whoop

hdzero cam mounts for the eco and the lux

Kitsune hdzero Lux camera cage

Kitsune hdzero Lux camera cage it's set at 25 degrees

HDzero Goggle Stand

A stand to help support the bottom half of the shell without putting strain on the display ribbon cables. Print detail isnt to important on this model, I would do large layer heights and low infill, a modifier can be used fo the upper…

HDzero Lux camera long leg canopy

Raises the canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. the canopy comes in at…

HDzero Eco camera long leg canopy

Raises the eco cam canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. The canopy comes…

Hdzero Tiny whoop canopy for Lux and Eco (45 and 40 degrees)

Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.

KAHA HDZero Nano90 V1/V2 Mounts

The Kaha is a frame I designed, designed to be a super strong durable drone racing frame which is cost-effective, runs 30mm electronics if you like and protects those electronics. Kaha translates to strength in Te Reo which is the…

HDZero TrueRC X-Air brackets and thumbscrews by Fourflies

These brackets feature some enhancements over other designs: X-Airs are held in place by clips. No adhesive or tape. Feet added to the bottom of the brackets supports the goggles and prevents the focus adjust wheels from touching. Curved…

HDZero goggle extreme comfort strap

If you've struggled to find a comfortable strap for your HDZero goggles, consider this. The strap is a Sunnylife TD78 , and is sold on AliExpress and other markets. The addition of the top strap plus non-elastic straps allows one to shift…

HDzero wifi/analog module pin cover

This cover can be used for the wifi/analog module to protect the pins if you are taking it in and out . This file has not been tested yet and any changes will be updated. it goes over the pins and gets held on with a small rubber band.

SMA plugs for HDZero Goggles

Designed to fit Micro AXII 2 stubby antennas. The Plugs are modelled to the official goggles 3d model. Printing the correct pieces for each side may be necessary, i have faced some weird alignment issues with them. Mine are printed in…

Adapter for mounting HDZero Whoop Lite in a DJI O3 bay

Should be printed in a flexible material such as TPU Two versions, with and without air vents

Hdzero Nano90 adapter to 28mm

After trying a print from thingiverse: https://www.thingiverse.com/thing:3792789 I found that it did not fit the Nano90 - so I then edited the print to be able to fit the nano90 but also added longer legs and a slot to allow the camera to…

HDZero Quest 3 Headband Adapter

Take the weight off your nose and reduce the “face hugging” of your HDZero goggles by fitting a Quest 3 VR headband. The choice of headbands is extensive, and most all provide better comfort and support of the goggles than the provided…

TBS Fusion Screw Shut Enclosure for HDZERO Goggles

My analog modules like to pop apart in my bag, so I designed a enclosure that is screwed closed with M3 hardware. The bottom antenna hole is enlarged to support a stubby omni. Files are orientated correctly you will need supports from bed…

Bezerk IQ0 Neuron HDZero 90 Camera Mount 47.5-55 Degree Prints

Bezerk IQ0 Neuron Frame Camera Mount 47.5 Degrees 23mm and a 25mm Stand off height The camera mount was created and modified using.

HDZero Expansion Module Cover (Blank or Hex)

A cover for the HDZero Expansion Module V2 (probably fits the V1 as well). There is a blank version (e.g. for further modification or customization) as well as a version with a similar hex pattern to the one found on the goggles…

[FPV] HDZero Goggles Sleeve

[FPV] HDZero Goggles Sleeve

Emmet's Copters - Einstein frame - HDZERO camera, lolipop and FIN mounts

EMMET'S COPTERS - EINSTEIN frame - HDZERO camera mount, LOLIPOP mount and FIN Category: Sport & Outdoors

[FPV] HDZero Goggles Shell

[🥽FPV] HDZero Goggles Shell

OpenIPC Radxa Zero 3W VRX case -- 3x EU RX cards w/ HDZero rail mounting

A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.

HDzero Box Goggle Fan adapter for vrx's

for hdzero box goggles to hold a vrx

Hdzero Lux Race canopy

After destroying 2 lenses in 1 night i decided to make a canopy that better protects the lens. The sides need to be trimmed a little bit so they are not visible while flying. Update , added 30 degree version and 2 extra protection igow…

FPV Wing Racer 20x20 vtx mounting - hdzero eco

The base can mount a hdzero eco VTX , I have also increased the strength of the base and widened the screw holes between the base and wing to allow m2 bolts and nuts to fit. Use the original model to print the other parts and follow the…

HDZero BoxPro Quest headstrap buckle

Low profile/shortened buckle to use Meta Quest 2/3 headstrap with HDZero BoxPro I ziptied the strap pieces to the goggles and they lay flat when in the storage bag I didn't like the feel of an elastic strap, especially with the weight of…

HDZero Lux Camera Canopy

Print this flat in TPU with no supports. Weighed approximately 0.6 grams.

HDZero Goggle Inserts for Prescription Lenses

These inserts let you fit the FatShark-sized/DIY prescription lenses onto the stock HDZero faceplate! Specifically, it takes the actual lens part of e.g. FatShark lenses. If you previously used this print of mine that takes the complete…

HDZero trueRC patch antenna holder for VRX-4

I didn't like the ones I could find on the internet to fix the patches to the rail on the VRX4 because I didn't like using double sided tape. I printed it in some tough TPU and for my setup the tolerances where perfect.

HDZero Lux camera 14mm adapter

This adapter allows one to use an HDZero Lux camera in a common 14 mm wide FPV camera mount, eg. compatible with a Happymodel Crux3 canopy, plus many others. The photographed samples were printed by JLCPCB in PA12 on their MJF printers.…

120mm frame for HDZero AIO5

Inspired by the Baby Tooth 1S, adjusted for the HDZero AIO5. Use the DXF file for CNC cutting from 2mm carbon. Mounting dimensions are slightly larger (26x26mm) than the standard (25.5x25.5mm) to make FC mounting less tight—also because…

Skyzone SteadyView X Cover for HDZero extension bay V2

I several small modifications to make it more sturdy less prone to breaking the clips and some changes for V2

TrueRC X-AIR Antenna mount for HDZERO Goggles with Walksnail Receiver Quickmount

This design will allow users of HDZERO goggles with X-Air antennas to quickly mount and dismount a Walksnail VRX without interfering with, or removing, existing antennas. The Walksnail VRX mount simply slides onto the sprung pegs on the…

Camera mount / HDZero Nano 90 / KayouMini / 25 degrees

This is my HDZ Nano90 TPU camera mount for the KayouMini FPV quad frame. In order to reduce weight, instead of holes, I use a single perimeter, with 15% gyroid infill. This creates a light “air matress” effect that protects the camera…

HDZero Lux KayouMini Canopy

This was made for using the lux camera with the aio15 in the kayoumini.

HDZero goggle adapter for Fatshark style straps

Made this to adapt old school closed loop goggle straps to hdz goggles. you could scale in the slicer for other goggle

HDZero Goggle / Goggle 2 Hard Case

This is a remix of MDHR's goggle case design, I wanted to make the overall size of the case more compact, add space for TrueRC patch antennas in front of the goggle, and add some lens protection to prevent the strap from touching them. I…

camera mount Firefly V2 1S HDzero version

The camera mount for the Firefly V2 1S HDzero version

Happymodel M8 Freestyle HDZero Carrying Box

I adjusted the size so that the original foam insert in which the drone came in can be reused. It protects the drone nicely so why not reuse it? You want to split the .stl into objects/parts to print them separately. I'd suggest to print…

HDZero Nano Light Camera Shell Case

With this case, you can use the full video mode of the camera. It slightly increases the resolution and adds a bit of a fisheye effect. You will probably need to adjust the lens holder size depending on the plastic you use, so I’ve also…

HDZero Googgle TrueRC X2 AIR 5.8 MK II Adapter

Description (English): This adapter is designed to securely and precisely mount the TrueRC X² Air 5.8 MK II antenna onto HDZero Goggles. It ensures a stable fit, optimal alignment, and prevents the antenna from rotating unintentionally.…

FPV Baby APEX 2.5 SoloGood HDZero

Nice little ripper for around the house. Baby APEX 2.5 HDZero AIO15 HDZero LUX Cam T-Motor 1103 8000KV Gemfan 2512 2.5 x 1.2 x 3 Print the camera ring in a solid material, the dampers in TPU or VarioShore. I removed a little bit of the…

HDZero Box Pro Protective case

Case to protect your HDZero Box Pro. As an addition you can also store a VRX inside this box. The VRX space is designed for the RunCam WiFiLink VRX (please try OpenIPC or RubyFPV!) But a Walksnail VRX will probably also fit. The Inlay and…

HDZero Freestyle V2 VTX Antenna Mount for 5inch Mark5 Frame

2 Models which fit on the Mark5 5inch frame. It can actually be used with any other small antenna but this one works nicely with the HDZero Freestyle V2 VTX

HDZero HALO ELRS Arm Mount B-Line Forty5

arm mount for the chonky ELRS antennas that come with the HDZero Stack. made for the B-Line Forty5.

Martian 2 HDZERO Antenna Mount

Liked the original thing. had to make a few changes Need a bit of a different slot in the mount for my TX5M.1's antenna. Also gave it a bit more clearance between part and prop. Original make was WAY to close for my liking. Print Settings…

vertical captive truerc x air hdzero goggle mount

turns the antenna cable so that it comes out the top and goes to the top right sma so that it the goggle has better analog perfomance

HDZero DFR 2S 4800Mah Liion Cover

HDZero DFR 2S 4800Mah Liion Cover

HDZero Goggle Captive TrueRC Patch Antenna Mount for Top Connector

I have always disliked how the standard mount for the TrueRC patch antennas created essentially a kink in the coax cables. I also hated how that design forced the 90 degree SMA connectors to push the front of the connector (the most…

HDZERO 25° PATCH ANGLE

HDZERO 25° PATCH ANGLE edit : v2 - adding a groove to prevent damage to the cable

Hdzero canopy V2

Updated version of the lux canopy or better fit of and added a 42 degree.

HDZero Stubby Antenna Adapter

This model is an adapter designed for the HDZero Box Pro Goggles and HDZero Goggles to ensure a better fit when using stubby antennas , such as the TrueRC Singularity Stubby 5.8 GHz antenna . The adapter eliminates the visible gap between…

Volare Axiom S2.5 HDZero Eco Cam mount

A camera mount to move the HDZero Eco cam a little bit more forward in the volare axion frame. The original mount has it tucked to far in the frame and a lot of the frame is blocking the view in the camera. This will move the camera…

75mm Open Prop Frame like Firefly Nano Baby for Moblite7 WS or HDZero Parts

I wanted a frame to replace the stock whoop frame for my Moblite7 WS frame, when I eventually broke it. I wanted it to be quick to print without supports and have no issues due to layer adhesion on small sections like most printed whoop…

Flyfishrc Volador II HDZero Antenna mount

pferectly fits the HDZero Antenna from the Freestyle V2 VTX bundle. the long shroud covers the whole antenna head for better protection but maybe worse detuning ? in photo is of the 65mm short shroud version. The 68mm version is the…

HDZero Echo patch mount for HDZero Goggles

There are two different mount versions for printing in TPU and hard plastics (ABS/PETG/PLA etc.). The difference is the cutout on one side of the mount. You can not fit TPU version if it is made of hard plastic because of goggle's…

Hdzero Joker racing canopy Lux and Eco

I really liked the Joker canopy on my analog whoops so i remixed them. New versions for the HDzero Eco and HDzero Lux cam. Lightweigt , Eco version printed in tpu95A is 0,7 gr the lux version is a little bit more. Adjustable angles ,…

HDZero Race v3 top plate insulator

print tpu

HDZero Goggles Walksnail Ascent VRX Mount

This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in…

HDZero Goggle 2 Prescription Lens Insert Frame

This is a replacement frame for the prescription lens inserts that you can buy via the HDZero website. Somehow the tabs on mine broke off while my goggles were in their case. I couldn't find an easy replacement so I modeled one. Note that…

Hdzero Race v3 rough model

It's FPV Era VTX Protection/Holder for HDZero Freestyle V2

This is a cage I created for the HDZero Freestyle V2 VTX to be mounted on the Era frame of itsfpv. It might work with other frames. The cage is compatible with antenna/GPS holders at the back of the frame. I created it in two parts, so…

HDZero Goggle 2 Prescription Lens Insert Frame - for Fatshark Style

These inserts let you fit the FatShark-sized/DIY prescription lenses onto the goggles! Lenses should be sized or cut to 24.5 × 17.7 mm. Print with the clips facing up, with support for the lens insert area. Pop the frame over the display.…

TrueRC X-AIR 5.8 MKII hdzero VRX mount

The double sided tape that came with the original 3D print was not sticking. This work better imo. printed it in PLA

HDZero Lux and Walksnail Avatar HD lite Camera Canopy 4 mounting points

A 30° fixed-angle canopy for the HDZero Lux and Walksnail Avatar HD lite cameras with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective…

HDZero Lux and Walksnail Avatar HD lite Camera Canopy 4 mounting points

A 30° fixed-angle canopy for the HDZero Lux and Walksnail Avatar HD lite cameras with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective…

HDZero Goggles 2 Mount for KKCOBVR

After dealing with the discomfort caused by the band and face foam, I decided to try my hand at designing a flip up strap that repurposes one of my old Quest3 straps that I wasn't using. This is using the KKCOBVR strap for the Q3. I've…

HDZero Freestyle 1W Butterfly Camera Micro V2 Mount / Pod

Nice little camera holder for the HDZero Freestyle VTX to hold camera and included antenna. Prints out of PLA+/Tough PLA, PETG, ABS or TPU. I would not print out of standard PLA just because it may be too brittle for the screws to thread…

HDZero Freestyle V2 holder

Holder for HDZero Freestyle V2 holder. I use it to keep my HDZero VTX in place when building RC Planes. Add M3 heat inserts to lower part of body and use short M3 screws to attach upper part of assembly to the lower one.

HDZero BoxPro Walksnail Ascent VRX Adapter

cleaned up the model a bit and added a mount for the walksnail ascent VRX print in something durable like ABS, PETG, ASA, etc assemble both halves with an m3 screw and nut

lens cover for hdzero googles

a lens cover for HDzero googles the main part is in in tpu and the handle is optionnal and i recommend abs

HDZero Hard Case Lid with Embedded Logo (Multi-Color / 3MF)

Slicer: Created and tested using OrcaSlicer 2.3.1 . (I am personally using this version because I've run into too many issues on the latest OrcaSlicer releases, but the file should open and work perfectly fine on later versions as well).…

HDZero Goggles Module Cover

Cover for the module bay on the HDZero Goggles V1.

Kayoumini HDZero AIO15 TPU battery straps + cable routing

This fits a kayoumini build using the XT30 cable that comes with the AIO15 and I have tested it with the flywoo explorer 420mAh HV 2S LiPo Inspired by models such as: and

Toothpick canopy - HDZero Nano + Foxeer Lollipop V3

Canopy designed to fit onto toothpick styled frames. It is designed to house the HDZero Nano (14x16mm) with a Foxeer Lollipop v3 antenna. Will also fit other, standard (14x14mm) cameras like the Runcam Nano HD and older analog nanos. The…

FPV Cycle Glide - HDZero Race VTX 30mm Stack Mount

Came up with this design to fit the HDZero Race VTX into a 30mm stack mount on the FPV Cycle Glide frame. Offset it so that it will sit inside the standoffs, just enough clearance to get squeeze it in and clear everything. I run mine on…

HDZero Micro V2 Camera Mount for Five33 Switchback Pro

WARNING - as there are no metal standoffs and the camera sits very close to the main stack this design ofers very little protection in the case of a crash - use at your own risk . It's probably best to mount the VTX at the top of the…

HDZero VRX Triple Feed Patch Array antenna mount

This mount is designed for the HDZero VRX. use M3x6 screws to attach the antenna to the mount. There is a left and a right version. The mount is at an angle so that the antenna points forwards.

TKS 2s canopy (HDZero + ELRS PP / EP2 + battery mount)

Toothpick style canopy deigned to accept: HDZero - Nano camera RX - ELRS PP / EP2 receivers (the RX fits behind the camera on a tray - glue in place) VTX antenna - friction fit or glue This version of the canopy is intended for use with…

Armattan Tadpole - HDZero

Armattan Tadpole parts Part 1 - 25.5 x 25.5 stack top Designed to fit HDZero - whoop board With mounting space for Happymodel ELRS - PP / EP2 Material - ABS V1 is the same as V2 other than enabling the HDZero board to fitter at 90 degrees…