HDZero Micro V2 Camera Mount for Five33 Switchback Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixed angle camera mount using the standard 25mm standoff height - it's a tight fit, but it works.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 132
- Makes
- 0
- Views
- 788
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
WARNING - as there are no metal standoffs and the camera sits very close to the main stack this design ofers very little protection in the case of a crash - use at your own risk.
It's probably best to mount the VTX at the top of the stack as it will free up some more space.
The photos show it at 50 degrees with 51477 props which gives a 3 or 4mm clearance between the props and the camera, there is about 2 or 3mm clearance behind the camera when the VTX is mounted in the middle of the stack - other camera angles may give more or less clearance so please double check everything before arming.
I have included the Fusion360 file for anyone wanting to create a remix with a custom camera angle or the camera in a slightly different position.