Search results: five33

Counting matching models…

PrintablesArmandoGallegos

Five33 LightSwitch

TPU Parts for the Five33 Lightswitch. We print all of our parts with Sainsmart TPU on Prusa MK3s

Downloads: 1,230
Likes: 35
Rating: 5

Order a print of this model

PrintablesAdrien Bacarisse

Five33 Zigzag 45 degree runcam Nanoracer4 mount

Print in tpu

Downloads: 17
Likes: 0
Rating: 0

Order a print of this model

PrintablesTimeless3D

Five33 Switchback Capacitor Mount

Wanted a simple and secure way to mount a 1000μF 35v cap to the back of the Switchback, this one is modeled for a Rubycon capacitor of that spec, but should fit similar ones. Capacitor snaps in with the groove held in place.

Downloads: 14
Likes: 1
Rating: 0

Order a print of this model

Printables

Five33 Little Flipper

3D printed parts for the little Flipper

Order a print of this model

Printables

Five33 Lightswitch V2 Ultra arm cover with HGLRC LED strip

Five33 Lightswitch V2 Ultra arm cover with HGLRC LED strip There are 3 versions, a normal cover without LED, one with LED slot for the HGLRC LED, and one with a slit for if you're using an opaque TPU though it will only be visible from…

Order a print of this model

Printables

Five33 Little Flipper arm bumper

small arm bumpers for a Five33 Little Flipper, not super necessary on a design like the Little Flipper but i noticed i was able to knick up the tips of the arms in some crashes and these seem to help without weighing too much. Printed…

Order a print of this model

Printables

Five33 Little Flipper O4 light camera mounts

Camera mounts for the Five33 Little Flipper for the DJI o4 “lite” camera and the factory mount it comes with. It works with factory screws. I tried and know you can't see any of the camera cage with the 25 deg mount. the higher/lower…

Order a print of this model

Printables

Five33 Spec7 Street League - Printed-Parts

This is a set of 3D printed parts for the FlyFive33 Spec7 Street Legal 7" frame. Canopy : - The canopy side panels feature an air intake to help keep your electronics cool - Print with “support on build plate” shoud be sufficient - Use…

Order a print of this model

Printables

Five33 LightSwitch V2 Ultra Pressnut Cover

A cover for the pressnuts on the lightswitch v2 ultra. helps prevent esc from shorting on the middle pressnuts. Print in TPU at 0.2mm layer height.

Order a print of this model

Printables

Five33 ZigZag TPU Parts

TPU parts for FIVE33 ZIGZAG

Order a print of this model

Printables

Five33 ZigZag TrueRC Core Cherry Antenna Holder Mount

Just a quick tinkercad remix to fit the TrueRC Core and Cherry antennas. I don't have the frame yet, but original dimensions are respected.

Order a print of this model

Printables

Five33 ZigZag 52 Degree Nano 90 w/upgrade lens Camera Mount

Just a quick remix for a 52 degree camera angle. Everything else is the same as the original.

Order a print of this model

Printables

OFP's Five33 designs

I design all items to print without any or minimal supports, all items currently in this list print perfectly without supports as of 3/17/2022 Category: R/C Vehicles

Order a print of this model

Printables

Five33 Switchback Insta360 GO mount

Insta360 Go mount for Five33 switchback. Print in TPU example footage in FlowState mode: https://youtu.be/TU-s9ToI6Ho Category: R/C Vehicles

Order a print of this model

Printables

FlyFive33 Switchback Custom TPU parts

TPU parts of my own design for the FlyFive33 Switchback frame Fixed 45deg cam mount - holds a Foxeer nano 1.8 lens or similar without screws New flipstick with hook under top plate Two-piece vtx antenna bulkhead (tbs screw-on type) mount…

Order a print of this model

Printables

FlyFive33 Anti-NURK ESC spacer

Thin TPU spacer to avoid Nurking your Aikon ESC on the FlyFive33 build! Keep the magic smoke in. Place on top of the pressnuts before installing esc. Has pads to block clamp screws from contacting ESC. enjoy! Print Settings Printer Brand:…

Order a print of this model

Printables

FPV Five33 Light Switch V2 GoPro Mount

Description: GoPro mount for a Five33 Light Switch V2 frame. Requires an M5 screw and bolt. Print Settings: I used SainSmart TPU, printed at a slower speed, and chose a higher infill.

Order a print of this model

Printables

Five33 CamBam TPU Parts

Mounts for the CamBam

Order a print of this model

Printables

Canopy for Five33 Tiny Trainer v2

Canopy for Five33 Tiny Trainer v2. Camera Caddx Ratel PRO version v2: - corrected camera tilt angle - Reduced canopy weight

Order a print of this model

Printables

Five33 Spec7 DJI 04 Pro with antenna mount

50 degrees, holds with one screw. Mount stock antennas into the frame.

Order a print of this model

Printables

Gemfan 2520 Clearanced Five33 Cam Bam Analog nano housing

Actually clears the gemfan 2520 props. Orginial did not. Relief cuts were made and screw holes filled in for press fit.

Order a print of this model

Printables

Five33 Switchback Pro Foxeer Micro Lollipop Mount

Not a lot to say about it, other than it holds your antenna. Printed mine using tree supports. Category: R/C Vehicles

Order a print of this model

Printables

HDZero Micro V2 Camera Mount for Five33 Switchback Pro

WARNING - as there are no metal standoffs and the camera sits very close to the main stack this design ofers very little protection in the case of a crash - use at your own risk . It's probably best to mount the VTX at the top of the…

Order a print of this model

Printables

Five33 Switchback Zero Camera and SMA Mount

Five33 Switchback Zero - HDZero Micro V2 camera mount This is a replica of the stock camera mount supplied as part of the Five33 TPU kit with the Switchback Zero. I was unable to find the same part on the Five33 website or their…

Order a print of this model

Printables

Fly Five33 Switchback HD Sharkbyte TPU parts

These are the parts I have come up with so far for the Five33 switchback HD frame . I am flying with Sharkbyte so I won't have any DJI designs in here. The original VTX antenna mounts will work for this frame as well. You can find them on…

Order a print of this model

Printables

Five33 Footy

Tpu Parts for the Five33 Footy

Order a print of this model

Printables

Five33 LightSwitch HD, Switchback HD, and Switchback Zero

Tpu Parts for the LS HD, Switchback HD, and Switchback Zero

Order a print of this model

Printables

Five33 TinyTrainer

TPU Parts for the Five33 TinyTrainer

Order a print of this model

Printables

Five33 Switchback Classic

TPU Parts for the Five33 Switchback Classic

Order a print of this model

Printables

Five33 Switchback Pro

TPU Parts for the Five33 Switchback PRO

Order a print of this model

Printables

Five33 Switchback Turtle Fin (Remixed)

Remix of https://www.thingiverse.com/thing:4562254 Flat base (without the underside clip) Category: Sport & Outdoors

Order a print of this model

Printables

Five33 Spec7 3D Printed Parts

This is our take on a beefy 7" spec racing frame. M5 Hardware! You'll need a 3mm driver 16mm-19mm Motor Mounting Lite or Long configuration cavity between mid and bottom plate can be filled with weight all 3d printed part .stl's available…

Order a print of this model

Printables

Five33 Switchback Skelefin

A tall, lightweight turtle fin that's stiff enough to not bend when the quad is upside down. Designed for the Five33 Swtichback classic, but can work on any frame with 20mm front standoff spacing. Stronger than it looks! Printing…

Order a print of this model

Printables

FIVE33 Switchback - TPU capacitor holder 470 uF / 50V

Order a print of this model

Printables

Five33 TinyTrainerV2 TPU Parts

Various TPU accessories for the Five33 TinyTrainer V2

Order a print of this model

Printables

Five33 Spec7 DJI Vista Camera Mount

Modified Five33's Spec7 DJI O3 mount to fit orginal DJI Vista Camera. Original Parts From Five33: https://www.printables.com/model/267170-five33-spec7-3d-printed-parts Tinkercad for modification:…

Order a print of this model

Printables

Snap on Radiomaster Five33 MCK RipStick Protectors

RadioMaster TX16S Gimbal Protectors | Five33 Ripsticks (MCK) This gimbal protector snaps to the stick and wont fall off! This is a remix to fit the MCK ripsticks. I shortened the height on the _short file, to be the height of the sticks…

Order a print of this model

Printables

Five33 Tiny Trainer RS Edition

I liked the features of the new Five33 Tiny Trainer V2 (https://flyfive33.com/tiny-trainer-v2-beauty-page/), with the “flip open canopy” and easy access to electronics and USB ports. In stead of spending more hard earned cash, I created…

Order a print of this model

Printables

Five33 Switchback Micro Lollipop mount

A simple mount for the Five33 Switchback holding a Foxeer Micro Lollipop antenna. The antenna is inserted through the slit on the bottom and held in place by fixing it to the frame's standoffs instead of puting it over the top plate as…

Order a print of this model

Printables

Five33 Switchback Zero Micro Lollipop mount

When getting all the parts for my new Five33 Switchback Zero together I ran into the changed top plate design when compared to the Switchback Pro. The one that comes with the Zero version is wider and therefore the Pro antenna mounts…

Order a print of this model

Printables

Five33 SwitchBack Pro Wall Hanger

A simple wall hanger that was designed to perfectly fit the Five33 Switchback Pro. With or without the SFG's installed. May fit other drones too. Give it a try! Three versions: Plain - No holes, attach to the wall with double sided vhb…

Order a print of this model

Printables

SoutheastFPV Typhon TPU Parts (Five33 models)

tpu parts

Order a print of this model

Printables

Five33 Switchback HDZero Nano 90 camera mount

Five33 Switchback Zero - HDZero Nano 90 camera mount Similar to the Five33 stock camera mount for Switchback Zero. Works with the HDZero nano 90 + upgraded M8 lens (1.8mm FOV D:150° H:125V:75°) To be printed in TPU The mount provides a…

Order a print of this model

Printables

Five33 Switchback Prints Set

Cam mounts include: 45deg Nano Cam Mount for 13mm diameter lens 50deg Nano Cam Mount for 12mm diameter lens 45deg Nano Cam Mount for Foxeer 1.7 lens (13mm) 50deg Nano Cam Mount for Foxeer 1.7 lens (13mm) 50deg Nano Cam Mount for Foxeer…

Order a print of this model

Printables

Five33 Tiny Trainer FPV Camera Mounts

Cam mounts include: 45deg HDZero Nano Cam (small lens) 50deg HDZero Nano Cam (small lens) 45deg Foxeer 1.7 Lens 50deg Foxeer 1.7 Lens 45deg Runcam (or similar nano cam) 50deg Runcam (or similar nano cam) Cameras are meant to be installed…

Order a print of this model

Printables

Five33 Tiny Trainer GoPro Bones Mount

The HD top plate is required for this mount. Use a zip tie on the rear of the mount to secure it to the top plate.

Order a print of this model

Printables

Five33 Tiny Trainer Prop Guards

Prop guards for the Tiny Trainer that do not require extra modification or removal of props/motors to install. They fit onto the ends of the arms by friction fit and a zip tie (not necessary but suggested if racing). The model is designed…

Order a print of this model

Printables

Five33 Switchback "Mini Lollipop 4" mount

Similar design to other Lollipop mounts, created to fit the “Mini 5.8GHz Lollipop 4 Antenna” found on Aliexpress. Includes Fusion360 archive including sketches, if you need to change the standoff distance for a different frame. Antenna…

Order a print of this model

Printables

Five33 Switchback Pro/Classic/Light HDZero Top Plate

This is a top Plate for the Switchback Pro combined with HDZero

Order a print of this model

Printables

Five33 LightSwitch V2 Ultra

TPU parts for the itty bitty LS v2 ultra

Order a print of this model

Printables

Five33 MidMount

3D Printable parts for the Five33 MidMount Frame. We recommend printing the pods in nylon.

Order a print of this model

Printables

FlyFive33 Footy - Peanut Snout Mount

When I saw the FlyFive33 Footy Frame for the first time I thought the Idea was interesting - when I held it in my hand it looked a lot less special, so I decided to, well, build something different. The Idea here is to mount the Caddx…

Order a print of this model

Printables

3D Printed Parts of FlyFive33 Tiny Trainer with Caddx Nebula

What's this? I wanted a tiny trainer from the moment I saw it first, so as soon as I saw it available I ordered one of those Frames. Now the TT sadly Isn't made for carrying an HD system, so a bit of Improvising is necessary. In the…

Order a print of this model

Printables

Five33 Switchback Gopro mount

I made a gopro mount for the five33 switchback frame. You can use "switchback-topPlate-wGoproMount" as a top plate or as an additional mount, depends on how the vtx antenna is mounted. The second fastening is with two screws and a cable…

Order a print of this model

Printables

Five33 SwitchBack Pro/LightSwitch parts by RV

I print TPU parts with 0.4mm nozzle

Order a print of this model

Printables

Five33 FlipSwitch TPU Parts

Flipswitch TPU Parts

Order a print of this model

Printables

Five33 FlipSwitch Freestyle Universal GoPro Mount

universal GoPro mount for Five33 Freestyle Frame.

Order a print of this model

Printables

Five33 FlipSwitch Freestyle Universal GoPro Mount - PS3

Universal GoPro mount for Five33 Frerstyle frame with PS3 spacers

Order a print of this model

Printables

Five33 FlipSwitch Freestyle Action Base - PS3

Base for the Five33 Freestyle Frame with holes for PS3 spacers.

Order a print of this model

Printables

Five33 FlipSwitch Freestyle GoPro 11 Mini Mount - 30 degrees - PS3

Five33 Freestyle Frame GoPro 11 mini mount 30 Degrees PS3 holes

Order a print of this model

Printables

Five33 Tiny Trainer HD TPU Parts

TPU Parts for the FIve33 TT HD Let me know if you need something designed for the TTHD

Order a print of this model

Printables

Five33 FlipSwitch Freestyle-HDZERO Freestyle V2-TrueRC singularity 72mm Antenna-Mount

Just add a tiny zip tie at the top of the print to create pressure on the antenna so that it doesn't move.

Order a print of this model

Printables

Five33 FlipSwitch Freestyle GoPro 11 Mini Mount - 20 degrees - PS3

Five33 Flip Switch Freestyle Frame GoPro 11 mini mount 20 Degrees PS3 holes

Order a print of this model

Printables

Five33 FlipSwitch Freestyle-HDZERO runcam microV2 mount

Best results printing at 0.17mm layer height. If M2 screw is too long, please use a washer on the outside before inserting the screw.

Order a print of this model

Printables

Five33 Long Range TPU Parts

Let me know what else you want added

Order a print of this model

Printables

Five33 Flipswitch HDZ micro V3 adapter

Update: v2 installed from the inside of the camera cage instead of the outside. The cam is way tighter Five33 Flipswitch HDZ micro V3 adapter New set of adapters that move the anchor point of the fpv cam so it doesn't poke out of the…

Order a print of this model

Printables

Runcam ThumbPro 4k mount for Five33 Frame

If you want, you can either add a ziptie to the back or thread the cable through the left open holes

Order a print of this model

Printables

Radiomaster BOXER Gimbal Protection for Five33 Ripsticks

Changed diameter of sticks so Five33 Ripsticks fit. Inner Diameter 17mm

Order a print of this model

Printables

Five33 Switchback Classic Frame

I don't think I ever modeled the original TPU parts, but I uploaded the model with my custom TPU stuff. If you are looking for the original parts, they are available as STLs on Thingiverse.

Order a print of this model

Printables

Five33 flipswitch dji action 2

extra proctection for the dji action 2

Order a print of this model

Printables

Five33 Flipswitch gopro hero 8 skull

for thos who still own a gopro hero 8

Order a print of this model

Printables

Five33 Dji action 3

this model is a revamp of the dji action 2. it has air bag bumpers that you can use or cut off and access the screen as well. alot with nd filters and extra front protection.

Order a print of this model

Printables

Five33 Spec7 3D print files

Several mounts I've modelled for the Spec7 frame. - Arm ends with slot for 5mm LED strip - Micro Cam mount at 45 degrees, sitting in front of the standoffs (doesn't fit between the standoffs) - Capacitor mount, two stacked vertically -…

Order a print of this model