1 / 4
HDZero Goggles Walksnail Ascent VRX Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to attach a Walksnail Ascent VRX to the front rails of the HDZero Goggles.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 57
- Makes
- 1
- Views
- 374
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in the slicer. The mounts attach to the VRX using the stock screw locations. You will need to replace the stock screws with longer ones. I used M2x12mm self tapping screws. Be sure not to over tighten it. Printed in ABS, but PETG should also work.