P
PrintablesCybuster
Skyzone O4X Walksnail VRX Mount
Walksnail VRX adapter for Skyzone O4X goggle. Also include exhaust without mount for remix to other adapter
- Downloads
- 372
- Likes
- 26
- Rating
- 5
Search results: vrx
Counting matching models…
P
PrintablesLukasz
HDZero Goggle SpeedyBee Analog VRX cover.
This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…
- Downloads
- 300
- Likes
- 21
- Rating
- 5
P
Printablesmstarzec
Walksnail VRX front mod sma connector
Walksnail VRX front mod sma connector v2 fits better
- Downloads
- 285
- Likes
- 8
- Rating
- 0
P
PrintablesBanditFPVprints
Walksnail VRX mount repair / replace
Mounts to repair / replace fragile stock mount *New versions added @ 9:35 GMT
- Downloads
- 253
- Likes
- 22
- Rating
- 5
P
PrintablesQuadamoose
HDZero Goggle Walksnail VRX Mount
The mount uses the stock screw holes on the back of the Walksnail VRX, but the screws will need to be replaced with longer ones. The stock screws are a different pitch, but I found that M2's hold in the plastic just fine. This mount is…
- Downloads
- 251
- Likes
- 28
- Rating
- 0
P
PrintablesPLOTmuniste
Skyzone 04 VRX hexagon fan cover (04x/04o/04x pro/04o pro)
Remixed from https://thangs.com/designer/Mender/3d-model/skyzone04xPLATE.stl-929465 . This is a simple hexagon fan grill cover for the secondary VRX slot on skyzone's 04o pro and 04x pro goggles. I wanted to remove the unnecessary SMA…
- Downloads
- 231
- Likes
- 18
- Rating
- 0
P
PrintablesMakerMe
Walksnail VRX front cover
Here's my version of Walksnail Avatar VRX front cover: It adds 2x SMA ports on the sides. Special tabs are designed to securely lock the SMA connector on the inside and prevent it from twisting. You will need slightly longer pigtails, I…
- Downloads
- 210
- Likes
- 9
- Rating
- 0
P
PrintablesIsTim
Caddx Walksnail VRX mount bracket replacement/fix
This is a small print with fine details - use the highest quality you can and 100% infill Replacement bracket for the Walksnail VRX mounting bracket which is prone to break at the mounting screw. Rafts: No Supports: No Resolution: High…
- Downloads
- 190
- Likes
- 13
- Rating
- 0
P
PrintablesChris Horton
Fatshark Walksnail VRX Holder
When I first printed the original model and attached the Walksnail VRX to it, I found the VRX didn't quite sit flush on my Fatshark Attitude V6 due to the length of mount, so I added a couple of millimetres to give it some more space.…
- Downloads
- 185
- Likes
- 21
- Rating
- 0
P
Printablesdg fpv
walksnail vrx front mod .step
walksnail vrx front mod .step file
- Downloads
- 171
- Likes
- 6
- Rating
- 0
P
PrintablesWoody_FPV
Skyzone goggles VRX Holder
This 3D print file is a Walksnail VRX holder designed for easy attachment of the Walksnail VRX to Skyzone goggles. It offers a flexible mounting solution, allowing you to securely fasten the VRX to your goggles. Additionally, with the…
- Downloads
- 164
- Likes
- 13
- Rating
- 0
P
PrintablesFailsafe-FPV
OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER
OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER Allows to mount a HDMI 1080p display Fits in the original radiomaster boxer carrying case - no disassembly required Easy assembly Can hold over 800 grams of weight Model…
- Downloads
- 162
- Likes
- 22
- Rating
- 0
P
PrintablesRiley Entropy
Skyzone Steadyview VRX Module
WIP Update 1 Only modeled the tallest IC's for now, but that should give an idea of the min clearance needed. Standby for more details when I have the time as well as the SKY04L module bay cover (I'm wondering if it's the same as 04X?).…
- Downloads
- 154
- Likes
- 3
- Rating
- 0
P
PrintablesDanO83
HDZero VRX Triple Feed Patch Array antenna mount
This mount is designed for the HDZero VRX. use M3x6 screws to attach the antenna to the mount. There is a left and a right version. The mount is at an angle so that the antenna points forwards.
- Downloads
- 147
- Likes
- 6
- Rating
- 0
P
PrintablesIsTim
HDZero Walksnail VRX rail mount - slidable
This is a slidable version of the Walksnail VRX mount which I use to mount the VRX with velcro. I didn't like having to bend the clips on and off and this just seemed easier.
- Downloads
- 144
- Likes
- 6
- Rating
- 0
P
PrintablesAllister
Walksnail VRX Tripod Mount
I wanted something a little more secure to hold my Walksnail VRX onto a tripod. The base has a hole for a ¼-20 threaded insert and an M3 insert for the clip. I'll admit I may have left the holes for the threaded inserts a bit small. The…
- Downloads
- 129
- Likes
- 11
- Rating
- 0
P
PrintablesIsTim
Caddx Walksnail VRX - GoPro Mount/Tripod Connector
A small connector that allows the VRX mount to be connected to a GoPro mount Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No Resolution: High Infill: 100% Filament: esun PLA Black Category: R/C Vehicles
- Downloads
- 119
- Likes
- 11
- Rating
- 0
P
PrintablesRiley Entropy
Walksnail VRX Module
Walksnail VRX Module the front shell cover is no fully accurate but everything else including the Electonics are
- Downloads
- 107
- Likes
- 6
- Rating
- 5
P
PrintablesMr V
Walksnail Avatar VRX Case for larger 4010 or 3010 fans
Depending on what fan size you plan on using you'll either need a 4010 fan or a 3010 fan. Pay attention to the current draw of the fan and keep it as close as you can to the original. I don't know what the VRX is fan output is rated for…
- Downloads
- 104
- Likes
- 5
- Rating
- 0
P
PrintablesSwissFreek
HDZero Walksnail VRX Mount 20º Up-Tilt
Like the title says, I tweaked IsTim's Walksnail VRX mount for HDZero goggles to have 20º of up-tilt built in for those of us that tend to look down as we fly. Only includes one side. Mirror the part in your slicer to make the other side.
- Downloads
- 91
- Likes
- 11
- Rating
- 0
P
PrintablesFailsafe-FPV
OpenIPC Ruby FPV Bonnet VRX with display bracket
For Assembly, watch this video:
- Downloads
- 85
- Likes
- 11
- Rating
- 0
P
PrintablesBanditFPVprints
Walksnail Avatar VRX Patch adaptor mounts
Some further modding may be required for large triple-feed array patches being fitted to a mini crossbow.
- Downloads
- 84
- Likes
- 10
- Rating
- 0
P
PrintablesSondre Hetland
Radiomaster AX12 Stand with Walksnail VRX holder
Use the built-in display of the RadioMaster AX12 to view a live Walksnail video feed. I designed this as a combined stand and mount for the Walksnail VRX, using the original mini-HDMI to mini-HDMI cable. Features: Uses the original HDMI…
- Downloads
- 79
- Likes
- 7
- Rating
- 0
P
PrintablesDan1lan
Skyzone 04X Walksnail VRX mount
Hey everyone, this model is super easy to print, needs supports only for VRX mount, to complete the assembly u will need one 4.5x3mm m3 threaded insert and one m3 bolt.
- Downloads
- 76
- Likes
- 9
- Rating
- 0
P
PrintablesFailsafe-FPV
OpenIPC / Ruby FPV compact goggle mounted VRX - Bonnet Based.
BOM: Radxa 3W, with soldered header OpenIPC Bonnet 4 x IPEX to SMA or RPSMA, 2x 5cm and 2x 10cm 5.5 x 2.1mm power barrell jack plug and socket 30mm x 10mm 5V fan Micro HDMI to HDMI cable USBC female socket
- Downloads
- 74
- Likes
- 7
- Rating
- 0
P
PrintablesBanditFPVprints
Walknail Avatar VRX blank front cover for patch templates
Use for mounting patches of choice
- Downloads
- 74
- Likes
- 5
- Rating
- 5
P
Printablesspiderixax
OpenIPC VRX enclosure
Note this is still a work in progress!
- Downloads
- 69
- Likes
- 10
- Rating
- 0
P
PrintablesAntony Cipriano
Walksnail vrx external antenna mod
A version of the external antenna mod for the walksnail vrx. i didn't liked other version as you had to reprint the entire front face you will need to remove the stiker with the walksnail logo you need 2 rp-sma to ufl connector
- Downloads
- 68
- Likes
- 8
- Rating
- 0
P
PrintablesIsTim
Caddx Walksnail VRX mount infill Cap
The mount for the Walksnail VRX is prone to breaking, if you don't want to replace it or don't intend to ever use it this print provides an infill so that you're not left with a gap in the top of your VRX If you're looking for the…
- Downloads
- 66
- Likes
- 2
- Rating
- 5
P
Printablespiero menetti
CADDX Avatar VRX bracket
Replace your fan shield with the orginal 4 screws and hold the caddx avatar vrx.
- Downloads
- 65
- Likes
- 6
- Rating
- 0
P
PrintablesOptikool
HDZero VRX Rail Mount 40deg
This is an HDZero VRX Rail Mount for the TrueRC X2-AIR MK II 5.8GHz Patch Antenna Pair. This adds a 40deg angle to the original rail mount. There are two versions for the left and right sides of the HDZero VRX Goggles. Update 11/16/22 -…
- Downloads
- 64
- Likes
- 6
- Rating
- 0
P
PrintablesАлександр Зацепин
My OpenIPC & RubyFPV VRX Case Radxa Zero 3W V2
Radxa ZERO 3W 4GB 32GB EMMC x1 https://aliexpress.ru/item/1005006677319461.html?spm=a2g2w.orderdetail.0.0.44404aa6RrHdEu&sku_id=12000039038015030 MP1584EN 3А x1…
- Downloads
- 63
- Likes
- 9
- Rating
- 0
P
PrintablesTokyo_Dom
Goggles X HDZero VRX mount
Simple mount for the hdzero vrx. Use adhesive Velcro to attach to the top plate of the goggles
- Downloads
- 57
- Likes
- 3
- Rating
- 0
P
Printablesqczek
Analog VRX box for DJI FPV goggles
Just box for uruav dji analog board adapter. Find out more on my blog http://qczek.beyondrc.com/analog-vrx-box-for-dji-fpv-goggles/ Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0,2…
- Downloads
- 57
- Likes
- 13
- Rating
- 0
P
PrintablesWill
HDZero Goggles Walksnail Ascent VRX Mount
This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in…
- Downloads
- 55
- Likes
- 9
- Rating
- 5
P
PrintablesT3000_FPV
Walksnail VRX Holder for Eachine EV300D
Zweiteilige Halterung zum Befestigen eines Walksnail Avatar VRX an einer Eachine EV300D FPV Brille. Da diese Brille keine Möglichkeit der schraubbaren Befestigung bietet muss die Grundplatte mit dem beiligenden doppelseitigen Klebeband an…
- Downloads
- 52
- Likes
- 4
- Rating
- 5
P
Printablesmorf
Matek VRX 1.2/1.3 GHz Airplane mount case
I'd browsed the internet but I haven't found a single case for Matek Video Receiver for 1.3/1.2 GHz. I designed it to be mounted sideways on the plane however feel free to remix it the way you like. I suggest to print using PETG, because…
- Downloads
- 50
- Likes
- 5
- Rating
- 0
P
PrintablesTimo S
openIPC PRO V1 VRX (Radxa+Dual 8812EU)
My first version of my openIPC VRX. Used parts: -JLCPCB Board (my own creation) -2x Tps54560 StepDown Boards (only for some parts) -2x FAN “SEPA HZ25B05” -2x RTL8812EU -4x SMA connector -1x 5-WAY SWITCH -1x Radxa Zero3W -1x USB hub FE1.1s…
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
PrintablesGizmo Goody
Polaris VRX iQ+ Control Box Wall Mount
Motivation I recently purchased a Polaris VRX iQ+ Robotic Pool Cleaner. It comes with a large control box that has no mounting screw holes on the back and can only mount to the provided non‑detachable caddy. We do not use the caddy and…
- Downloads
- 43
- Likes
- 2
- Rating
- 5
P
PrintablesJure
Walksnail vrx cover for TrueRC X-ari patch antenna
just double side tape the patch on the cover and use the stock fan and sooling thingy.. it should fit. :) i printed mine with 0.2layer height … i dont think anything else is important .. orient howeveu u think its good for u .. i did mine…
- Downloads
- 43
- Likes
- 3
- Rating
- 5
P
PrintablesGonnir
Smaller Openipc/Ruby FPV Bonnet VRX Box based on Wojciech's design
Based on Wojciech's design
- Downloads
- 42
- Likes
- 5
- Rating
- 0
P
Printablesah9illator
HDZero BoxPro Walksnail Ascent VRX Adapter
This is a Caddx Walksnail Ascent Pro VRX mount for the HDzero BoxPro + FPV Goggles New version accommodates top mount as well as front mount, and folds flat for storage/transport. Use the top mount to reduce neck strain but you will need…
- Downloads
- 42
- Likes
- 3
- Rating
- 0
P
PrintablesBrounch
Holder for Walksnail Avatar FPV VRX
After the Walksnail Avatar Vtx's original attachment system broke, I made a PETG version that is fixed with three screws (see photos).
- Downloads
- 42
- Likes
- 3
- Rating
- 0
P
PrintablesAsh
DJI Goggles V2 Skyzone SteadyView VRX faceplate
Model This is a remix for a Skyzone SteadyView, make sure to look online for instructions on how to do this mod and double check everything before powering it on. Parts needed 1x 5V 500ma plus step down converter that can accept 11.1 to…
- Downloads
- 41
- Likes
- 4
- Rating
- 0
P
PrintablesKuna
Walksnail VRX to 3M DUAL LOCK
Printed from ABS but also compatible with PLA and PET-G. Printed in the position like shown on picture does not requre any supports.
- Downloads
- 40
- Likes
- 2
- Rating
- 0
P
PrintablesHashi Maru
Radxa Zero 3w OpenIPC RubyFPV VRX / Groundstation
updated - SD card is now accessible from the rear This is a case that holds a Radxa zero 3w and two BL-M8812EU2 wireless radios, intended for use with OpenIPC/RubyFPV on a set of goggles. Please disregard the antennas used, I'm waiting on…
- Downloads
- 37
- Likes
- 4
- Rating
- 0
P
PrintablesFlowerFpv
Supporto Vrx Walksnail per Fatschark hdo2
Supporto Vrx Walksnail per Fatschark hdo2 rispetto quelli trovati in rete permette di tenere la vrx più parallela alla parte anteriore dei googles.
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
PrintablesBanditFPVprints
Walksnail Avatar VRX front cover rail mount
Based on a great model for hdzero goggles
- Downloads
- 34
- Likes
- 1
- Rating
- 0
P
PrintablesBURDFAMFPV
HDzero Box Goggle Fan adapter for vrx's
for hdzero box goggles to hold a vrx
- Downloads
- 33
- Likes
- 11
- Rating
- 0
P
PrintablesPradumn Singh
Openipc FPV Ruby fpv VRX ORV2
Most compact VRX for Openipc FPV and ruby FPV Radxa zero 3w 1gb no emmc BL-R8812AF1 NIC 4x m2x10 standoffs 4x m2x10 screws 25 to 5V bec 5v to 3v bec 10v 220uf cap 20x20x5 8000rpm fan 5v 6x push buttons jumper cables shielded wire for NIC…
- Downloads
- 33
- Likes
- 5
- Rating
- 0
P
PrintablesRoiS
Walksnail VRX Ground-station With Duel GEPRC Triple-feed Patch
Overview Upgrade your FPV ground station with this custom tripod mount designed specifically for the Walksnail VRX and dual GEPRC Triple Feed Patch Array antennas. This functional upgrade provides a highly rigid, solid mechanical…
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesArtus Muc
Walksnail VRX HD-Zero Rail
i have a video online how i use this 2 Rails to mount the Walksnail VRX to a HD-Zero Google. this example is printed PETG without support - use autoorientation function.
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
PrintablesCerberus
HD Zero (SharkByte) VRx Mounting Bracket
If you find yourself wanting to mount a HD Zero VRx to some flat surface somewhere. Maybe a multiiview set up or a ground station. Then this is the bracket you need. Enjoy! Special thanks to Mr David Owens. Who drew the original, that I…
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesPhen X Frame
Support VRX Walksnail On DJI V1/V2
FACE PLATE DJI : https://www.thingiverse.com/thing:4068603 VRX WALKSNAIL : https://www.thingiverse.com/thing:5641034
- Downloads
- 31
- Likes
- 6
- Rating
- 0
P
PrintablesSmika
The Crown: Radxa SBC OpenIPC Ground Station 3x EU2 6 Antenna VRX
This is a tough tight build. Edit: Backplate v2 has 2 more millimeters of depth, the side SMA ports adjusted, the ¼" screw threading extended, and exhaust cooling in the back. The extendo is 4 additional mm to make adding 20x20x10mm…
- Downloads
- 30
- Likes
- 6
- Rating
- 0
P
Printablesjs3d
OpenIPC GS Radxa zero VRX Case
Radxa zero 3w x1 wifi card - RTL8812AU AF1 x2 USB hub x1 40mm cooling fan(5v) x1 5v dc step down x1 3.3v dc step down x1 switch x1 button x1
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
PrintablesGundamF99
Walknail Avatar VRX Panel Spherical Port
Walknail Avatar VRX Panel Spherical Port
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
PrintablesTomi
VRX Spirit Buggy front swing arm
Useable spare part for FTX, VRX 4WD Buggy
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
PrintablesSergey Parshin
Skyzone 04X Walksnail VRX mount - remix with the strap loop
Print at the angle, like on the image, so it has some strength along the loop too
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesA6M-Zero
Walksnail VRX Noctua Fan Mod - 40mm
As you may know , the default fan in the Walksnail VRX gets insanely noisy. This might not be a big issue if you are flying outside, but if you are a whoop pilot the fan noise gets annoying pretty quickly. I modded the front plate of the…
- Downloads
- 25
- Likes
- 5
- Rating
- 0
P
Printablesjs3d
OpenIPC Radxa zero 3w VRX Case
VRX case using 2 Wi-Fi cards m8812eu2. Radxa zero 3w x 1 Bec 5V 3A (for radxa zero) x 1 Bec 5V 5A (for two wifi card) x 1 BL-M8812EU2 wifi card x 2 usb-hub module x 1 on/off switch x 1 recoding push button x 1 etc.
- Downloads
- 24
- Likes
- 2
- Rating
- 5
P
PrintablesCreefy FPV
Aomway commander mod for FatShark based vRx modules v2
This model is a remix from Thingyverse: https://www.thingiverse.com/thing:4594800 V2 is more rigid + the blend files are cleaner and easier to edit. First You have to open up the goggles. It is held by two screws, I also unscrewed the fan…
- Downloads
- 23
- Likes
- 0
- Rating
- 0
P
PrintablesAnthonyH
Walksnail VRX tripod mount
Standard 1/4-20 bolt tripod mount for the Walksnail VRX.
- Downloads
- 22
- Likes
- 6
- Rating
- 0
P
PrintablesFailsafe-FPV
7" FPV Screen with Magnetic VRX Dock
This is a 3D-printable mount designed specifically for a 7" FPV screen and driver board available here: 👉 https://www.amazon.com/VSDISPLAY-1920X1080-Brightness-Supports-Secondary/dp/B0DK8D7MRY?ref_=ast_sto_dp…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
Printablesowenboen
TrueRC X-Air Antenna Mount for OpenIPC Runcam WifiLink VRX
Even though the WifiLink VRX strongly resembles the HDZero VRX and has similar looking rails, it appears to be a different size. This mount slides onto the WifiLink front rails, holds the TrueRC X-Air. Print vertically with a brim, no…
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesElvish Tac
VRX-15 Gunstock Pistol Plate for Half-Life: Alyx and Half-Life 2 VR
This is an optional accessory for the VRX-15 VR Gunstock. Valve VR games such as Half-Life Alyx, and Half-Life 2 VR, require the two VR controllers to be held at a very specific stance, while most VR shooter games such as Pavlov, do not…
- Downloads
- 15
- Likes
- 4
- Rating
- 0
P
PrintablesJohn Godwin
OpenIPC Radxa Zero 3W VRX case -- 3x EU RX cards w/ HDZero rail mounting
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
Printablesjs3d
OpenIPC Radxa zero 3W VRX for Eachine EV200D goggle final version
This is the OpenIPC VRX case model. It has been designed specifically for the Eachine EV200D goggles, with no consideration for other products' goggles. Since the goal was to achieve a compact size, a smaller BEC must be used to fit into…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesMrMPod
HDO2 adapter for HDZERO VRx
After mounting HDZERO VRx on HDO2 there is no room for a patch antenna, so I made a little adapter to have quick-mount for HD Zero VRx and Shield antenna. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesspectrexFPV
Eachine ROTG02 VRX Tripod Case
Eachine ROTG02 VRX Tripod Case Features 2 positions for tripods ¼" thread, fits most small photography screws on tripods and mounts Cutouts for easy access to buttons and ports Print Settings Printer: Creality Ender 3 Filament material:…
- Downloads
- 15
- Likes
- 6
- Rating
- 0
P
PrintablesB20bob
Shark Byte VRX patch antenna cover plates (snap on)
Stock 8db antenna cover plate .stp files for designing custom antenna mounts. It took me some searching to find this file online and actually had to download it from the description of a YouTube video, So I thought I'd upload it here with…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesSmika
iSpy: Another OpenIPC SBC VRX Case
About: Use the hdzero rails from this model: https://www.printables.com/model/811132-openipc-radxa-zero-3w-hdzero-goggle-case-rail-moun/files I glue the two halves shut with my soldering iron… I made this in autodesk fusion, I am not a…
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
Printablesjs3d
OpenIPC Radxa zero 3w VRX / single rtl8812eu2 wifi card case 2026
한개의 wifi 카드만 사용한 VRX 케이스 입니다.
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesGalinette
FPV base station mount for SpeedyBee VRX, GoPro mount, And VRX Expansion board
Base station housing to make your own FPV base station You will need: - A SpeedyBee VRX - A VRX adapter board : https://fr.aliexpress.com/item/1005009439234064.html - Any Gopro mount to attach it (tripod screw, etc...)
- Downloads
- 11
- Likes
- 6
- Rating
- 0
P
Printablesikilledmypc
HDZero trueRC patch antenna holder for VRX-4
I didn't like the ones I could find on the internet to fix the patches to the rail on the VRX4 because I didn't like using double sided tape. I printed it in some tough TPU and for my setup the tolerances where perfect.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablesrivado
Quanum Vandal / VRX Spirit / FTX Vantage Aluminum Chassis Protector
Protectors for the Vandal Aluminum Chassis Plate (Part No. 10930). Needs to be glued to the chassis after press-fitting (carefully with a hammer if needed). I glued also some velcro to the protectors and canopy to stabilize it. Had to…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printablesrivado
Quanum Vandal / VRX Spirit / FTX Vantage Suspension Ballhead Pin
Designed this from scratch in Tinkercad. Print it horizontally for strength. When assembling, push the metal ball head from the front into the printed pin and then fasten the screw. Print Settings Printer: Sidewinder X1 Rafts: Yes…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesstranger
TrueRC X-AIR 5.8 MKII hdzero VRX mount
The double sided tape that came with the original 3D print was not sticking. This work better imo. printed it in PLA
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesClément
patch antenna trueRC mount for additionnal VRX
print in in abs with out support
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesChris_Khold
VRX 2 RC Car Drivetraincover
I oneday realized that the Drivetrain of my VRX2 RC car is slowly but surely eating up the cables inside the car because the gears are completely uncovered. So I made this, reasonibly well fitting, cover.
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printables
OpenIPC Radxa Zero 3W VRX case -- 3x EU RX cards w/ HDZero rail mounting
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.
P
Printables
Skyzone 04X Walksnail VRX mount - remix with the strap loop
Print at the angle, like on the image, so it has some strength along the loop too
P
Printables
OpenIPC Radxa zero 3w VRX / single rtl8812eu2 wifi card case 2026
한개의 wifi 카드만 사용한 VRX 케이스 입니다.
P
Printables
HDZero Goggles Walksnail Ascent VRX Mount
This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in…