1 / 1
Arrma to Traxxas Wheelie bar adaptor — image 1

Arrma to Traxxas Wheelie bar adaptor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

converts traxxas drag wheelie bar to fit some arrma models

Rating
0 / 5
Likes
4
Downloads
4
Makes
0
Views
99
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This takes the mount for the standard ARRMA wheelie bar on most brushed models and most 3s and 4s models and adapts it to accept a Traxxas wheelie bar. The Screw holes are a little tight and may need to be opened up slightly by turning the screw in and back out little by little or by using a thread tap. It fits standard Traxxas drag slash wheelie bars. i ended up 3d printing a slightly longer wheelie bar for it.

NOTE: the actual bumper may need to be trimmed depending on the wheelie bar that is used!

i used standard PETG at 6 walls, 6 top, 6 bottom, 30% Gyroid Infill, .28 layer height and printed it on its side so that the layers went vertically and it make a very stout and probably overbuilt part. only used supports on the 2 ears that were sticking out and used an outer brim.