Heltec E-213 Vision Master Meshtastic
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the Vision Master E213 ESP32-S3R8 LoRa Development Board SX1262 Chip with 2.13" E-Ink Display
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 49
- Makes
- 0
- Views
- 293
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Vision Master E213 ESP32-S3R8 LoRa Development Board SX1262 Chip with 2.13" E-Ink Display LoRaWAN BLE 5.0 WiFi Compatible with Arduino LoRa Meshtastic IoT（902-928MHz).
I was looking for a case for the Heltec E-213 Vision Master that was similar to an Alley Cat design, but no luck. So I made a rough copy cat…see what I did there?
Installation is tight so be careful as you will need to slightly flex the model to allow the device to slip in, especially around the buttons.
Get the Vison Master here (Amazon)
Used the Hiteuoms 3.7V 3000 mAh battery (Amazon)
Remember to attach the antenna before powering on.
UPDATE: Second Plate has an optional component to be used with a Baofeng style belt clip.
Get the Baofeng Belt Clip here (Amazon)
Hardware needed is 2x M2.5 x 8mm screws and nuts