Subwoofer Aktiv/Passiv Copie conept 1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small 5,25 Inch Subwoofer aktive/Passiv
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Technical Specifications
Frequency Response: 28Hz to 200Hz.
Versatility: Designed for both active (with integrated amp) and passive configurations.
Engineering & Print Details
To withstand the high internal pressure of low-frequency audio, the enclosure is engineered for maximum air-tightness and structural stiffness:
Material: Rapid PLA.
Nozzle: 0.8mm (for superior layer bonding and speed).
Wall Thickness: 4 solid perimeters, resulting in a 3.2mm airtight shell.
Infill: 30% Gyroid to minimize cabinet resonance.
Structural Hardware
Standoffs/Legs: The enclosure is elevated from the base by four 10mm diameter aluminum rods (100mm length).
Parts List:
Speaker:
Passive Radiator:
Speaker Terminal:
Aluminum rod (3x 10mm x 100mm
Parts List: Amp (optional)
24V LED (you choose the color):
RCA female jack (2 Holes):
TPA3116 Subwoofer Amp:
DC Power Jack( 5.5X2.1mm DC099)
DC-to-DC Filter 4A 25V (Recommended!!!!!)
Powerswitch (MTS-102):
Instructions are self-explanatory
The amplifier was mounted to the rear using superglue, and rubber feet were added to prevent the subwoofer from moving on the floor. It is crucial that the enclosure remains airtight to ensure proper acoustics and the correct operation of the passive radiators.
A 24V 5A power supply is recommended for better sound quality and lower noise floor
Status: Done
Contact: For questions or support, please contact me at: [email protected]
Stay tuned for more speaker projects and other electrical DIY stuff!