Counting matching models…
This is a specially designed aeroplane for attaching a spoon or fork or knife at the end of it. Makes for a great simple print for your kids (or yourselves if you're avgeek enough!). This does require a customised hole to be made on the…
UPDATE 2026-01-05: After playing the game with family members on New Year's Eve, I revised the game instructions to make them much easier to read, and 33% shorter. I also fixed a serious type-O, and modified the rules a bit to make them a…
I printed the slide standing up with tree supports on build plate only. So the bottom where filament fall through will be on the build plate and the tree supports will be supporting only the parts where the screws go through. 2. The…
welcome to this project. if youre here from the youtube HELLO! and thanks for actually building something lol if you did not find this from the youtube but want 3d printing files, parts list / instructions go check it out at…
This is a nozzle wiper for the CR-10SE. It uses those inexpensive A1 nozzle wipers, which can be found online for a couple of bucks. I made this because the purge line would always pick up a blob of filament, potentially ruining the…
I have printed it in PLA filled at 15% except for the anchors, which I have increased the perimeters to make it 100% (PrusaSlicer mod) with organic supports. I have created this box as a concept for other solutions that can be presented…
This purchase includes two different models. One is for the cupholder and tray itself and the other is the for the inserts that are placed into the cupholder to hold your drinks effectively. *!!!Depending on the slicer that you use you…
This is a construction manual for making a Tricorder Bag from faux leather. Also included are files for various buttons and other extras I used to construct my bag. Includes the round buttons for the interface, the wide buttons for the…
This is a specially designed aeroplane for attaching a spoon or fork or knife at the end of it. Makes for a great simple print for your kids (or yourselves if you're avgeek enough!). This does require a customised hole to be made on the…
Welcome to the Kit Card Tree Library with the 3UDC pivot mount and information on how to build a display for your kit card or anything else you opt to attach. This project uses parts from several different projects. You will print the…
UPDATE 2026-01-05: After playing the game with family members on New Year's Eve, I revised the game instructions to make them much easier to read, and 33% shorter. I also fixed a serious type-O, and modified the rules a bit to make them a…
I LOVE my Nuki, but I HATE how people always get confused and don't know how to leave... so I made this cover which has an arrow and instructions on it. I printed it in white TPU, and it fits great. The original model is a bit too tight…
Small, functional Bluetooth speaker, consisting of a battery holder, amplifier, bluetooth module, and a speaker. No supports are needed for printing the box; however, a brim may be useful for the feet. I glued the speaker and the battery…
This is a speedo holder for a Koso DB01RN for Husaberg 70° models with all wiring instructions. I made a 0° and 10° holder. You need to check which angle is better for you (because of reflection and the “bad” viewing angle of the display…
This free download contains the building instructions, the print guide and a single test part of the model “Hot Fusion”. The release-notes of pre-release V1.3 have been added to the downloads section. Version V1.3 is only a pre-release,…
Since Gulf Coast Robotics is no longer in business, I thought I would share the stl files and instructions for their X, Y, and Z linear rails for the Ender 3 S1 Pro. The linear rail guides, drill template, and the ribbon cable holder are…
I posted this as remix because "makes" don't allow you to add files. I created an installation and use manual which is helpful for using this DrawBot. It explains how to install the Inkscape software and extension and how to use the…
A simple Door Stop Plate to stop your door handle from making marks on your wall!
I made the text easier to paint in Bambu Studio
Detailed 3D-printable (13-step guide) Jeep Wrangler Sahara 1:20 scale kit – ready for assembly and customization. The 13-step pdf guide streamlines the process, providing clear instructions and practical tips for printing, assembly and…
Please read: These are the files as I used them to make my LX system replica. This includes raw STL files of each part as well as a bambu lab 3mf file that includes the parts pre cut into parts that fit the P1S build plate (256 x 256)…
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
I made these little Ikea instruction guys to place around my desk and office. Thought I'd share them in case anyone else likes them. I included two models for each pose, one with the white and black portions of the model at the same…
Printed both ways, text up and down to test both possibilitys. My mk4s send multible fault warning for filment stuck…. if anyone knows how to fix i would be thankfull. Followed instructions from @3DesignsCH making Prusa Tool Box - CORE…
Create Your Own Parameterized Rear Bike Light Mount A downloadable STL is included for quick Viewing. If you find it useful, a follow is always appreciated! (Copy the file and customize it)Onshape Link:…
I made the Hymec work for the SXV. So I write here for others in the future who want to do this as well. 1. You need Magura Hymec 2100005 (this has a cylinder for 51-53mm working stroke). The SXV has 49mm and Magura says you should take…
Make sure to choose the correct file for your type of battery. You need something to poke the pin out to remove the original pad and to reinstall it for the new one, I used the straight pick from a 2$ set from Harbor Freight. (Check the…
Biologically optimal plant pot with planting guides. Maintain the water gauge between empty and full.
*(legal disclaimer at bottom) Safety: If undertaken please make sure it is legal in your location and fly model rockets outside and away from people, property, and living things, the methods in this guide can be dangerous and might not be…
I printed the slide standing up with tree supports on build plate only. So the bottom where filament fall through will be on the build plate and the tree supports will be supporting only the parts where the screws go through. 2. The…
welcome to this project. if youre here from the youtube HELLO! and thanks for actually building something lol if you did not find this from the youtube but want 3d printing files, parts list / instructions go check it out at…
This is a nozzle wiper for the CR-10SE. It uses those inexpensive A1 nozzle wipers, which can be found online for a couple of bucks. I made this because the purge line would always pick up a blob of filament, potentially ruining the…
Add this badge to your Core ONE to commemorate replacing the main cable, in your choice of MAIN CABLE or HLAVNÍ KABEL. The hard part of adding this skin to your Core ONE is the work on the inside. Background: I had to replace the main…
Disclaimer: This will NOT 2D print. I just simply used a heightmap in Imageto3D to turn it into a model. Use detailed settings (0.15 or lower layer height) to make the instructions clear. Although, I don't know why you would even want to…
This is made to try helping others to make this fun little RobotGeek 9G robot arm. I will try to explain what is needed to build it. Program it and what pc software to use to control it. Post-Printing Part List 1x Arduino Uno…
Hardware required: 1x Hand-sewing needle 1.5mm diameter or more, and at least 21mm of useable length before the eye starts, or a stainless nail of the same minimum length to under the head. 1x M3 threaded rod at least 85mm long (and a…
Originally from Thingiverse (thing:584), public-domain, now optimized for 3mm thickness with slots measuring approximately 3.01mm (thing:3935261 CC:Attribution). I changed some parts so the foot fit better. Remember , this is a puzzle,…
Ok so, I wont be posting pics this is a simple text guide lol. USE THE ORIGINAL GUIDE IN CONJUNCTION!!! I have only built my Yavoth I hurt myself so I have not yet been able to mount to the printer or program the board, I am using the…
Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the…
Rotates like a helicopter! Post-Printing Instructions Step 1: Printer settings Rafts: No Supports: Yes Resolution: 0,2 Infill: 100% Step 2: Assembling Glue it with super glue and it's ready to use! Category: Toy & Game Accessories
I really enjoyed assembling the blaster from mh319, but there were some things I wished it had that it didn't. So here is an overview of what has been changed or added. I created instructions to assemble it. I added screw holes, an…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
Assembly Instructions (also available as PDF) About the EC 135 The Eurocopter EC135 (now Airbus Helicopters H135) is a twin-engine civil light utility helicopter produced by Airbus Helicopters (formerly known as Eurocopter). It is capable…
Retro Rocket Ride Edit 30.09.2022: After printing I have found the tolerances on the model may be a bit loose. I am in the process of updating the components. Edit - 19.09.2022: IMPORTANT - After realising that there were some issues with…
After having a long print failure i thought it was time to finally get a runout switch. I didnt find anything I really liked that worked with the limit switched I had. -Assembly- Just print both halves as oriented in the files (support…
My take on dual Z for Ender 3 pro - I have to say that this is by far the best upgrade I have done on my printer. I wanted simple solution for installing dual Z. I didn't want to “duplicate” the Z stepper as you can't be sure they are…
Print these 4 handy adaptors if you did not read the original print instructions. Slides right on. if not, use a drill to open up the holes… I guess you can scale these too on just the z axis, and cut the ends off the male component to…
Swapping filament colors mid-print will produce 3D creations with real visual pizzazz. Included here are detailed instructions in PDF format explaining how to carry out a filament swap, along with annotated G-code inserts you can adapt to…
This is a small and convenient keychain that you can print on your 3D printer. To ensure that the keychain has a the infill exposed, you need to modify the print settings to remove the top solid layer. Here are the steps to do that: Open…
Update 2021-01-31 As a small boy (a long time ago) I had a water rocket toy. I decided to build one for my grandchildren. The base idea that the toy will be (relatively) safe so that young children can play with it. I do not have the…
Quick refrence to instructions for Zach's ( https://thangs.com/designer/ZackFreedman ) game called Hextraction.
This thing is a concept/blueprint for '5ft Lighted Stargate' (Thingiverse ID 2783393) to modify it, so that the glyph ring can be driven by a stepper motor. Please note, that I did this work for my version of the '5ft Lighted Stargate'…
Please don't forget to like - I want my Prusameters! 😄 ###################################### I love good tools, but got a little bit mad with using my nice caliper for calibrating e-steps / rotation distance, because I got inconsistent…
Turn your anycubic printer into a more capable unit with a text display, auto-leveling, and Marlin with input-shaping. This is a fairly complex project. It takes several hours and you need to be able to cut a hole into metal and crimp…
Hello Everyone! Here i present my 2 colour Christmas name tags for your christmas tree! Download the Fusion file and edit the text layer with your name and export as STL or OBJ! Step by Step Image Provided if you are a new Fusion 360…
Need a place to put a my IP alcohol and a small bottle of Acetone). I also included a blank with Cut Blocks so you can make your own custom bottle holder. Instructions on how to edit the file to customize it yourself below. HOW TO MAKE…
This is the large version, also the small version is available on my profile. The download includes the pdf with parts and assembly. Curiosity is a car-sized robotic rover exploring Gale Crater on Mars as part of NASA's Mars Science…
This is the small version , also the large version is available on my profile. The download includes the .pdf with parts and assembly. Curiosity is a car-sized robotic rover exploring Gale Crater on Mars as part of NASA's Mars Science…
Information about 3D Printed Magnetosphere Model The 3D Printed Magnetosphere Model was created by citizen science project Aurorasaurus in collaboration with NASA's STEAM Innovation Lab and the Magnetosphere Multiscale Mission (MMS). This…
This provides instructions for the users on how to play Stoli, and a place to roll the die inside so that the die does not roll off the table. This is a great add-on for Stoli, when giving Stoli as a gift, because it gives the recipients…
Premise I'm an engineer. I figure things out for a living. But I also thrive on having a formula, so I got some whiplash to find the Slack Lack with minimal instructions for assembly. Once I was finished, I could say it all made sense --…
I made this to be a cute way yo hang your poloroids
A little tool to make it easier for you to paint the Easter eggs. An egg can be clamped between the two holders using the rubber band. The distance can then be optionally fixed with the screw. By turning the handle, the egg can be painted…
AIR CANNONS Experience the exhilaration of launching projectiles with our innovative 3D printed air cannons! These cutting-edge designs offer a unique blend of creativity and engineering, allowing enthusiasts like you to print and…
Fan replacement: Deciding on and buying replacement fans: First thing you want to check is what fans are currently built in into your printer. In my case i had a 6015 (60 width and height, 15 depth) 12V 0,2A powersupply fan and a 8015 24V…
Dies ist eine einfache Ablage für unsere Bedienungsanleitungen einiger Küchengeräte. So bleiben die Anleitungen übersichtlich. Die Abmessungen sind 200 mm lang x 150 mm hoch x 40 mm innen (46 mm außen). Auf der Unterseite befinden sich 4…
Hubs are a thing of the past. Be part of the future by building, playing with, and proudly displaying this hubless bike. 93.5% of the model is built out of LEGO TECHNIC, while the rest (the wheels and couplers) are printable. Complete,…
Obvious Disclaimer: This will NOT 3D print. Assembly instructions for Dummy 13. Folds into 1/8th A4 booklet if you want to 2D print it. The assembled dummy 13 file is included but fair warning it is cumbersome as I had to convert from the…
Where are all the 5kg filament spool dry boxes? DIY Build video: https://youtu.be/h-Q685tzcTM You may find that there are few options for 5kg spool-printing ballers like yourself. So let's roll up our sleeves and make a super effective…
Instructions on water annealing/dying Polymaker PA6GF Glass Filled Nylon Be aware dying any color lighter than the grey it comes as will require significant experimentation. I will try to answer questions as i am able, please leave them…
I wanted to create a compact LED tester that allows me to easily check the functionality of LEDs with two different current settings. This model provides a straightforward and efficient solution for testing LEDs at 10mA and 20mA currents…
Updates: I finally tested the rear cap fitment and found that they were a bit tight. I've since replaced both the rear cap and the pods with updated files that have better fitment. Sorry to those that may have already printed these…
in case you suspect the other party on a video call is in fact an AI
This is a decorative lightsaber with space for working LED's Building instructions: Please read the instructions carefully before printing. Please ask if there are questions. Required parts: For the Model: White / Transparent Filament for…
Intro- Based on Michael Klements design. I did not want to purchase custom parts to make his Bitcoin ticker so I made this fully 3d printed design. For exact wiring and code please refer to Michael's webpage -…
![[Concept instructions/Blueprint] Stargate - Rotate glyphs with stepper motor](https://media.printables.com/media/prints/614928/images/4881062_0b38b6a0-986e-488a-a3eb-b10d54aa843e_5ea8282c-042f-48c2-ae34-caa7acb153ca/large_display_concept_bottom_center_614928.png)
![Dummy 13 [BETA] Assembly Instructions](https://media.printables.com/media/prints/870301/images/6680884_f72690ba-3c09-4865-bf8c-ca848404b76d_67244405-f71f-4ba5-ac30-897bb3016af5/assembly-guide.jpg)
