1 / 13
Radeon 7800XT fan shroud adapter 120mm asrock challenger OC — image 1
1 / 13

Radeon 7800XT fan shroud adapter 120mm asrock challenger OC

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Radeon 7800XT fan shroud adapter 120mm asrock challenger OC, maybe compatible with 7700XT and 7900GRE

Rating
0 / 5
Likes
5
Downloads
16
Makes
0
Views
287
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

This a fan shroud to replace the standard 95x10mm fans with 120x25mm ones, I used Arctic Cooling P12 PRO ones because it have a very good cost/performance ratio.

The main idea it's to use their high static presure to blow aire using a fan shroud on the heatsink and reduce the noise.

Most of people prefer to do undervolt even loosing 5-10% performance, I prefer to push the limits and take my performance :)

This is for Asrock challenger 7800XT , but seems to be compatible with 7700XT and 7900GRE.

BOM
  • 4x - M2x8(or 10mm) SHCS to attach the fan shroud to the standard fittings

  • 4x - M3x10 FHCS to attach the extra clamps on the center (optional)

  • 3x - M3x10 FHCS to attach the fascia to the fan shroud

  • 8x - M3x6 FHCS to attach the branding to the fascia

  • 15x - Voron style heat inserts (8 for fans, 4 for extra clamps, 3 for fascia)

  • 2x120mm high static pressure fans, do not use case fans.

Printing instructions

Fan shroud

  • Use heat resistant material for the fan shroud, mine's is PBT+GF, but ASA/ABS will be good :)

  • 5 walls

  • 0.15mm layer height

  • 8 top/bottom solid layers

  • Use the model with tabs to avoid warping.

Case

  • Use at least PETG for the case

  • 3 walls

  • 0.15 layer height

  • 5 top/bottom solid layers

Fascia branding

  • Use your settings, is not structural, I used PETG with my proosa XY.

Considerations

This is not a typical fan adapter, my idea is to use the whole heatsink, with standard fans you cant. Because of that I designed this 15mm fan shroud.

Aditional tabs

They are not mandatory but I think 4xM2 screws are a bit insufficient.

Results

With furmark same RPM fans (2500rpm)

GPU core , 64->59ºC
GPU hotspot - 108ºC->92ºC
GPU mem -> 100ºC -> 80ºC

Much less noise now

Fan at 100% (3000rpm)

gpu core, 64->57ºC
GPU hotspot - 108ºC -> 90ºc
GPU mem -> 100ºC ->75ºC

Fans at 1750rpm (almost no noise)

gpu core 64ºC->65ºC
gpu hotspot 108ºC->99ºC
gpu mem 100ºC->92ºC

Gamming the temperatures are lower

Tags