Counting matching models…
🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…
This a fan shroud to replace the standard 95x10mm fans with 120x25mm ones, I used Arctic Cooling P12 PRO ones because it have a very good cost/performance ratio. The main idea it's to use their high static presure to blow aire using a fan…
Print for mounting Noctua NF-A9x14 fans (frame removed) to PowerColor 7800 XT Fighter GPU (potentially other models as well, not tested).
Just a little USB battery bank I drew up and 3D printed. The enclosure is designed to fit three 18350 lithium-ion cells (WIRED IN PARALLEL) and an AmpRipper 3000 v1.0 from Kickstart Design (Link below). Assembly is very easy. First, plug…
Modified some files to fit the XFX Speedster MERC 319 Radeon™ RX 7800 XT BLACK Edition
A simple custom fan shroud for XFX Merc Series graphics cards of the RX7000 series. Low profile, accepts any 120mm fan using M3 hardware. Uses M3 threaded inserts (d=~4,2mm, L<7mm). Includes optional flexible exhaust duct (soft TPU).…
🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…
I purchased a new Atari 2600+ Pac-Man Edition and several new games, and wanted a holder that not only stored my cartridges but also the instructions. I designed this holder to be printed on a Prusa Mini+ without supports. It is quite a…
This a fan shroud to replace the standard 95x10mm fans with 120x25mm ones, I used Arctic Cooling P12 PRO ones because it have a very good cost/performance ratio. The main idea it's to use their high static presure to blow aire using a fan…
This is a Mounting Kit for a 4 Pole Female 3.5mm headphone jack, to solder into a Composite Video Mod, intended to replace the Atari 7800's RF modulator. The idea is, instead of drilling holes into your 7800, you would replace the RF…
This tiny cart display stand is the smallest you will find. I made sure there is just enough gap between the back rest and the lip for most cartridges. The non-card type cartridges look like they are floating due to the tiny size. The…
Print in TPU or similar for flexibility and fuel resistance, also recommend using some gasket maker/RTV to be safe.
This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS this is surprisingly strong (3mm walls probably help), but you will likely need longer screws than the ones you might (or…
You lost your HP workstation mounting screws? Just print 4 of these :D It's not perfect, but it works :)
Print with or without supports. Either way requires cleanup. First try was slightly long, but still fits, and is easier to reattach the strap to. Use “Short” version for tighter fit, untested. Took me 5 minutes to put together.
Files to Print Required Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display. Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them…
HP 800 G1, 8000, 8100, 8200, 8300, Ultra Slim USDT Hard Drive Caddy Tool-less Category: Parts
Compaq Armada 7800 CF/HDD Adapter --------------------------------------------------- Adapter to fit an old hard disk to Compact Flash card. This fit the Compaq Armada models: 7700 7800
The official Cisco part for wall-mounting 7800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
Soporte para la FT7800 para atornillar a la pared/Support for FT7800 to screw to the wall Print instructions Category: Electronics Summary Soporte para la FT7800 para atornillar a la pared/Support for FT7800 to screw to the wall Print…
Protect your console cart port from dust ect. Use supports, obviously. I do 3 walls minimum on all prints. 15% Infill.
To assemble you will need to print our nut hammer and 4, 10x32 nuts and ½" screws If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay -…
Cap for Yaesu FT-7800 dial knob (Should fit for 6mm, with 4.5mm cut knobs, i.e channel knob in FT-897).
