Modular WAGO 221 Storage-Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular storage box inspired by the WAGO 221 connector. Fully scalable and easy to print.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 1
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
This oversized connector‑style storage container is designed to be fully modular. You can build it in any length by adjusting the number of segments. The parts can be printed in full color, but the model also works perfectly on single‑material printers—just slice it as a single tool and enable part merging in your slicer.
Parts to Print
Main Body
1x End-left
1x End-right
nx Segment
(n-1)x Divider
Lid
1x Lid-end-left
1x Lid-end-right
(n-1)x Lid-segment
nx Lever
*Replace n with the number of segments you want.
Settings for clear PETG
Hardware
0.6mm HF nozzle
Smooth PEI sheet
Material
Elegoo Rapid PETG
Temperatures
Nozzle: 240°C
Bed: 85°C
Cooling
15 - 25%
Speed
50mm/s (or slower)
Layer Settings
Layer height: 0.15mm
Top layers: 0
Bottom layers: 0
Extrusion
Perimeters: 1
Extrusion width: 0.8mm
Flow: 108%
Infill
100% aligned rectilinear
Direction: 0° or 90°
Post-Processing (optional)
Sand up to 1000 grit
Apply gloss clear coat
Polish to final finish