1 / 1
LMR400 coax cable prepper for PL259 crimp connectors
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cuts the shield, braiding, and foam core to expose the lengths that mate with the crimp connector.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 47
- Makes
- 1
- Views
- 228
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Uses 3 standard utility knife blades. Needs 2x M3x20 and 1x M3x25 screws and nuts.
Stack the parts in order: a_cover, a, b, c, c_cover. Should be pretty straight forward.
Cut the coax, push it in all the way, clamp down, and spin the thing around the cable a couple times. While clamping, rock the cable a bit back and forth and pull towards the end to remove the excess.