Artillery Sidewinder X4 front cable relocation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Relocate the hotend cable to the front of the printer
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 174
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
On Artillery Sidewinder X4 Pro/Plus a weak point is the hotend ribbon cable, it touches the gantry bars and can damage.
This project is for relocating this cable in front.
The lower part can be chained or left free.
The upper part is too short to be chained.
Simply twist the original metal support on the toolhead and use zipties to firm (give two round of adhesive tape where the ziptie touches.
For the version without chain there's a simplified X engine cover with two locking band to print in TPU.
Look at pictures.
For Sidewinder X4 Pro print 22 links, I don't know how much to use on X4 Plus, just try some more.
2 different ribbon rotating support for the base are provided for X4 Pro and Plus.