Assault Bike Battery Cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.23 – €0.28 net (excluding VAT)
For file: assault bike battery cover_0.4n_0.15mm_PETG_MK4IS_14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 13.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Battery cover for the AssaultBike Classic bike.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement battery cover for the AssaultBike Classic bike. I recommend printing it in PETG, so the clip can flex without breaking. I have not tested it on anything other than PETG, and it works great. It is a simple, quick print with some small supports.
Recommended Print Settings:
0.15 mm Layer Height
2 Perimeters
100%+ Infill
Supports Required
PETG