1 / 5
Voron V0 Dragonburner Sherpa Mini EBB36 Gen2 mount — image 1
1 / 5

Voron V0 Dragonburner Sherpa Mini EBB36 Gen2 mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

There was no fully fastened PCB mount with 4 screws out there for this combination, so I made one.

Rating
0 / 5
Likes
10
Downloads
60
Makes
0
Views
400
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Description

There were no EBB36 Gen2 mounts for Voron v0 & Dragonburner & Sherpa Mini using all 4 screws, so I made one. I didn't want only 2 screws holding the PCB with all the forces from the stiff umbilical.

I've also included a snap-in cover for the Sherpa Mini for nicer optics. This is the reason spacers with an higher diameter are required. I made my own stronger spacers.

Parts and BOM

You'll also need the provided 2 printed spacers, if you want to use the cover,  which have a larger diameter than regular ones. In total you'll need 6 Voron-style heat inserts. 4 for the spacers and 2 for the ebb36 mount. The latter are required for the PCB mounting. 4x m3 bolts are required too. I can't remember the length. Possibly 6mm or 8mm.

Printing

Print orientation as provided. Use support for the ebb36 mount and mouse ears for the cover as indicated in the appropriate image. Brim for the spacers might help too.

Tags