1 / 4
Tempest weather station wedge base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 20mm tall base to be used to create a wedge for mounting a Tempest weather station on an un-level surface
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for a Tempest weather system. I have one that's mounted on a fence that's not level.
This model contains a 20mm tall base that can be used to create a wedge for leveling it.
Mine needed a 7 degree tilt and a 10 degree turn off north. I used the slicer rotate tool to first turn the base. I then used the slicer cutting tool to carve off the height I needed. Your install will likely need different rotations. Use the 20mm base as your starting point.