Ontos-Double Stack Magazine version with a custom DS magazine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ontos with a double stack magazine compatible magwell and ram
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 94
- Makes
- 1
- Views
- 1,103
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
The files are uploaded for 32-35 plunger tube ontos and 35-38 plunger tube ontos. The files for 32-35 ontos have not been tested as I don't have that.
The files are compatible with existing ontos. You would need to replace the center section, breech, priming bar, mag release and ram. Everything else is from the original ontos or 35-38 ontos remix.
I wanted to make this compatible with (most) existing sections of the ontos and therefore the center section will have a slight bulge in comparison to the other sections. The step files are in the respective folders in case somebody wants to thicken the other sections to match the modified center section.
You need two m3x1cm (towards the barrel) and two m3x3mm bolts (towards magwell) to secure the breech to the center sections.
The base plate has two parts to it to make it easy to print. Print 2 of the pins and join the two parts of the base plate using the pins and some superglue.
Thanks to Moose and his discord group for the negative tool for designing the magwell and all the advice and suggestions.