Counting matching models…
NOTICE - 3/13/2026 PSA to avoid AKBlasterMod for kits. I've received several reports of plunger tubes from their kits shattering on high spring loads. As they are making kits with no permission or contract there is not much I can do to…
Iron Sights -- ONTOS hardware free for the Picatinny rail Adapted my one piece iron sights so that the shape fits better to the ONTOS (original) optic rail. The files are already pre-oriented. It needs approx. 20g of filament. My print…
This cute Brontosaurus in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
Ontos trigger with holes to match the blaster aesthetic, added +2mm to remove the trigger play/slop from the original design, slightly rounded the face for comfort. 2/22/2026 - Added +2mm length to remove slop, added a no hole version of…
My local club plays at 150fps, and all of our Ontos builds were hitting at least 180. One of our members discovered that a 225mm barrel combined with this 1.3 x 248 Kunlun spring from Out of Darts allowed the blaster to reliably and…
If the Ontos is for the lazy and the poor, then surely I should be able to print it. This remix changes 4 parts of the Ontos which are too big for a 180x180x180mm printer, namely FrontLeft, FrontRight, BackLeft, and BackRight. Information…
A low profile Silly Collet Nut for the Ontos. I wanted a Silly Collet since I prefer tightening my barrel with O-Rings, but the kit I bought had a smaller barrel (300mm), so I needed to free up some space in order to attach my RIPPCAR.…
FITS THE LEGACY ONTOS! The Ducky Stock The Ontos by Impulse Ungineering is an amazing foam dart blaster, but the original stock is even fully extended a bit short for my liking. I present to you the Ducky Stock, which is 65mm longer and…
These guys had hundreds of teeth in their jaws. Now they have glass eyes too! :) 4 variations are provided. 6, 8, 10 and 12mm. Files are named accordingly. I printed the 8mm variation to save time and filament. This one is easy to print.…
Added files for regular ontos as well. These are experimental as I have not tested these. _________________________________ I found the trigger pull for the normal Ontos to be too tough when using 1.6 springs. The plunger head, catch,…
This is a barrel retainer which threads into collet insert from Flatcurve's Buck-Fifty and accepts an EX thread compatible BCAR. Note: I refer to this as a retainer rather than a collet since it makes with the end surface of the barrel…
Legacy Ontos for use with 32x35x150mm plunger tube. BOM: https://docs.google.com/spreadsheets/d/1O0dQbupgveN6VRQrPYz316ZOcr5q0UTBdK9yiOfWQlk/edit?gid=1309835870#gid=1309835870
Use 3x 1.2mm wire by 20mm OD by 50mm compression springs ( same as that foxbat slide return ) for an automatic pump slide return. Not tested on the original Ontos shroud but should work since the geometry is the same. Sources -…
🦖 What is a Brontosaurus? Name: Brontosaurus excelsus Era: Late Jurassic (about 155–150 million years ago) Home: Western North America — especially Wyoming and Utah Group: Sauropods — the giant, long-necked plant-eating dinosaurs…
Easy to make a cute Brontosaurus keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
I only found 1 picture with the rocket so its not very accurate but idc
If you’re interested in selling any of my 3d printed products, make sure you grab a commercial license from my Patreon . This commercial license will give your access to sell my models as well as get early access to my patreon exclusive…
Round and adorable dino christmas ornaments! Both were modeled from a sphere, but one is a triceratops and the other is a brontosaurus. I created these so that I could gift my dino loving friends some dino themed decor :) V2 update -…
The cool Boom Grip modified for the ONTOS and SBL. The picatinny recess going through the whole front grip. It may also work with other pump-action blasters with a picatinny rail for the pump grip if they are not wider than the ONTOS or…
Easy to make a cute Brontosaurus keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
I am new to 3D scanning, so I am practicing on cheap Chinese-made toys. My youngest daughter absolutely adores dinosaurs. This model can be scaled to fit your bed. Use your best judgement with print settings. Supports are required. The…
Model prints great at .2mm layer height and is available in STL or 3MF versions. The 3MF version comes painted, all you have to do is load your filament and print! The hooks are intended to be installed with one #8 screw, and it is…
Towering above the rest, the gentle giant Brontosaurus is here! Known for its massive size and long neck, this prehistoric herbivore roamed the Jurassic era, and now it’s ready to roam your print bed! Model Features: ✅ Elegant long-necked…
1:35 scale model of a carchardontosaurus. The model features detailed scale texturing. There are three versions of the file, walking, running and stalking. The .STL files are fairly big, they may take a while to load.
Baby Brontosaurus Dinosaur which is double sided and requires MMU/AMS
Towering above the rest, the gentle giant Brontosaurus is here! Known for its massive size and long neck, this prehistoric herbivore roamed the Jurassic era, and now it’s ready to roam your print bed! Model Features: ✅ Elegant long-necked…
A small, round, and lovable brontosaurus toy! I made edits to my Brontosaurus Ornament [ found here ] so that it could be printed as a small figurine instead. Printing Brim - HIGHLY recommend adding a brim. The model's feet are tiny so I…
NOTICE - 3/13/2026 PSA to avoid AKBlasterMod for kits. I've received several reports of plunger tubes from their kits shattering on high spring loads. As they are making kits with no permission or contract there is not much I can do to…
Just an easy to print brontosaurus. Hang it on the wall, or just put it on a side table.
I always have better results working with the SIllybutts style locking collets with o rings than the tapered collet style. I usually print in a wide range of materials and these are more reliable.
Just some lil side rails for extra's use the same m3 x 12 whatevers you used to assemble the blaster. Big thanks again to IU for an amazing blaster
Do you want your Ontos to try just a bit harder? How much harder? How about 1.5 degrees harder? Since the Ontos requires some sort of mounted optics, I figured I'd make it a little easier to sight them in (especially with lower-powered…
Iron Sights -- ONTOS hardware free for the Picatinny rail Adapted my one piece iron sights so that the shape fits better to the ONTOS (original) optic rail. The files are already pre-oriented. It needs approx. 20g of filament. My print…
This cute Brontosaurus in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
Referenced SillyButts Plunger tube design to create a variant for the Ontos. 150mm long and OD of 35mm ID (with the plastic insert) is 32mm. Works great! I have tested it and barely noticed a drop in FPS compared to the aluminum tube. I…
Ontos trigger with holes to match the blaster aesthetic, added +2mm to remove the trigger play/slop from the original design, slightly rounded the face for comfort. 2/22/2026 - Added +2mm length to remove slop, added a no hole version of…
Intended to be used on a 30 cm barrel with a WhiskerPCAR or similar profile scar. Two versions offered, one based on a 3d printed Max Stryker suppressor and the other based on a Mega XL adapter. I also included a slightly shorter version…
This alternative ram for the Ontos blaster reduced the amount of misfeeds and misfires from using magazines with stronger springs like the Nerf Pro Stryfe X magazines and drum spring based magazines. The original ram would pinch darts…
Stock Plate - Extended a couple centimeters, no hardware changes but using superglue to put the plate onto the stock with the screws is recommended. Trigger - Extended the back end of it a bit just to remove the play from it, making it…
There is the revised grip itself, the Ontos-specific inner part, and the tight fit nut.
Follow the print instructions and orientation for Ontos. Except for the back, center, ram and plunger head, everything else is the same as Ontos. Two obvious hardware changes: Plunger tube is 15cm 35 ID 38OD tube Use 30-35 orings or 123…
We gave added two different version of our brontosaurus fidget keychains
These mod parts will let you fire long darts on an Ontos. Why? My kid has a ton of long darts and it's a pain to separate them all. Plus, I just wanted to see if I could do it. Tested with Nerf and Worker long dart magazines. I even put a…
We made the the tail solid for easier printing and they are roughly 50 percent smaller than our fidget/keychain versions. Version one has the hole for earrings further back allow the earrings to have a slight leaning forward to the dino…
Ontos Long Barrel - Silly Collet - Mixed up Ontos Long Barrel - Silly Collet - Mixed up the collet to keep the style but have the silly collet - oring system that i prefer.
My local club plays at 150fps, and all of our Ontos builds were hitting at least 180. One of our members discovered that a 225mm barrel combined with this 1.3 x 248 Kunlun spring from Out of Darts allowed the blaster to reliably and…
If the Ontos is for the lazy and the poor, then surely I should be able to print it. This remix changes 4 parts of the Ontos which are too big for a 180x180x180mm printer, namely FrontLeft, FrontRight, BackLeft, and BackRight. Information…
1:35 scale model of an Edmontosaurus. This was based on the recent study about their preserved skin/soft tissue. At this scale, it measures 15 inches in length. The model features detailed scale texturing heavily based off of the skin…
Replica edmontosaurus skull. Remixed model from Laser Design on Sketchfab. I cleaned up the topology and fixed most of the manifold issues. At default scale, the model measures 15" in length. This model was made for 350mm^3 print beds due…
This is a remix of the middle piece of the Ontos Side Rails with widened holes to accomodate M3x4x5 inserts to try and make the connection sturdier (since I will be using it to attach a sling point) and to make it easier to assemble and…
Two pieces grip for the Ontos. This lets you add a little bit of color and makes for a better look. Prints as oriented in the file, with the same settings as the other Ontos parts. No supports required. Requires 2x M3x4x5 inserts and 2x…
A remixed stock for the Ontos. It uses two M3x4x5 brass inserts at the back for the screws to prevent stripping into plastic if you ever wish to change the buttplate (which I will do later on when I finally end up buying TPU). Also added…
Mag release with holes for the Ontos. Prints exactly like the original. This is only a visual improvement.
A low profile Silly Collet Nut for the Ontos. I wanted a Silly Collet since I prefer tightening my barrel with O-Rings, but the kit I bought had a smaller barrel (300mm), so I needed to free up some space in order to attach my RIPPCAR.…
A replacement collet to use for you Ontos. It requires a 016 o-ring and an appropriately designed nut (such as the one linked below) in order to lock the barrel in place. I decided to remix the remix because it had too much wiggle for my…
FITS THE LEGACY ONTOS! The Ducky Stock The Ontos by Impulse Ungineering is an amazing foam dart blaster, but the original stock is even fully extended a bit short for my liking. I present to you the Ducky Stock, which is 65mm longer and…
Raised Picatinny Rail (+10mm) --- ONTOS --- Foam Dart Blaster The picatinny rail was a bit too low for me to aim comfortably with simple iron sights. I slightly raised the Ontos optic-rail by 10mm for more comfortable aiming. (suitable,…
These guys had hundreds of teeth in their jaws. Now they have glass eyes too! :) 4 variations are provided. 6, 8, 10 and 12mm. Files are named accordingly. I printed the 8mm variation to save time and filament. This one is easy to print.…
Hi this is my first real project and it was created in Tinkercad so please give feedback and suggestions! I love long pic rails, and carry handles, and I love the Ontos, and that's all there is to it. UPDATE: Added circuitry deco files…
Ontos skin remix -UPDATE 3/14/2026: added triggerguard file set for pivot sear -UPDATE 3/3/2026: added pivoting style trigger files Requires additional m3x8 button head/socket head screws for top rail Changes to original hardware plunger…
Added files for regular ontos as well. These are experimental as I have not tested these. _________________________________ I found the trigger pull for the normal Ontos to be too tough when using 1.6 springs. The plunger head, catch,…
This is a barrel retainer which threads into collet insert from Flatcurve's Buck-Fifty and accepts an EX thread compatible BCAR. Note: I refer to this as a retainer rather than a collet since it makes with the end surface of the barrel…
The files are uploaded for 32-35 plunger tube ontos and 35-38 plunger tube ontos. The files for 32-35 ontos have not been tested as I don't have that. The files are compatible with existing ontos. You would need to replace the center…
Makes your Ontos take standard threaded barrels. Print at 0.1 mm height. PETg, PCTG and PC work fine.
32mm ID, 35mm OD and 35mm ID, 38mm OD files available. Requires 3 M3 heatset inserts, and 3 M3x6 bolts. Print the pad and Ontos plunger in TPU for improved dampening. The less infill the more cushioned the ram to a certain extent. Less…
Legacy Ontos for use with 32x35x150mm plunger tube. BOM: https://docs.google.com/spreadsheets/d/1O0dQbupgveN6VRQrPYz316ZOcr5q0UTBdK9yiOfWQlk/edit?gid=1309835870#gid=1309835870
Use 3x 1.2mm wire by 20mm OD by 50mm compression springs ( same as that foxbat slide return ) for an automatic pump slide return. Not tested on the original Ontos shroud but should work since the geometry is the same. Sources -…
The double stack mag Ontos by Ash works flawlessly, however if you're retrofitting your Talon mag Ontos, you need a new ram. The Potatofeeder kit uses a special size ram, so this has been sized for that kit. If you have an Ontos with the…
Scorpion is a remix of the V1.X (Legacy) Ontos that uses the 35mm PT. This remix gives the Ontos a nice change in ergo with an ACR-style body and stock while staying true to the Ontos' original design principles. A V2.X-compatible (TC…
🦖 What is a Brontosaurus? Name: Brontosaurus excelsus Era: Late Jurassic (about 155–150 million years ago) Home: Western North America — especially Wyoming and Utah Group: Sauropods — the giant, long-necked plant-eating dinosaurs…
Remix of the front two (left and right) sides of the frame of the Scorpion Ontos. full Credit goes to the original designer, Idosu for the base models. I simply added MLOK compatibility These are untested, although the MLOK specs were…
A simple, cute little brontosaurus mini figure to print and paint alone or display it with my other mini figures. Enable supports to protect the belly and chin.
This remix adds new inserts for the Ontos SillyHikari Scar by LS MODS . Also adds a knurled TPU ring to the barrel attachment base. This setup allows you to quickly switch between different *CARs while maintaining a consistent look. PCAR:…
Adds a textured grip pad to the Ontos grip. This remix provides: Voronoi textured grip pad textured using https://bumpmesh.com . Plain grip pad for you to texture yourself in BumpMesh. Make sure model is oriented at 90 deg and use…
This remix overlays a full depth camo pattern consistently across the Ontos v2 (TC plunger length not 150mm) body shell. Some features: 5 color camo pattern (4 camo layers and default body color). Based on the Yougoslav MD89 pattern from…
Bring a touch of prehistoric charm to your home, office, or creative space with this adorable 3D printed brontosaurus figurine. Designed with a perfect balance of whimsical styling and intricate detail, this mini dinosaur features a cute,…
Set of 2 plungers, shortens the draw to ~3.5" and ~2.75". The long screw version is for 1"/25mm long #4 or m3 screws, but there's a version that uses regular stock ontos screws, but then you'll need a longer allen key possibly to install…
The Impulse Engineering Ontos Threaded Barrel Breech is a printed breech part that accepts any M16x1mm threaded-breech barrels using Out of Darts' custom brass threaded insert. Featuring a taco-like shape and printed fingers to maximize…
The Impulse Ungineering Ontos O-ring Breech is a modified breech part that uses a DASH-016 O-ring to assist with barrel retention. The O-ring adds extra friction where excess vibration from play may push the barrel out of the blaster.…
The Impulse Ungineering Ontos Plunger Volume Reducer is a modified Plunger Rod/Tail that shifts the catch point, allowing Ontos to hit lower FPS caps more easily and consistently. Like with Harrier and Seagull, this mod works best with…
Stores spring spacers in the grip of your Ontos. Angle the insert back and slide it through the front half, then slide it back to secure it inside. Slide it forward to pull it out.
🦖 Meet Bronto– Cute Print in Place Articulated Baby Dino More models to print are available exclusively for my Patreon supporters ✨Join here to get access: https://www.patreon.com/kogi3d Bring home one of the adorable members of the Baby…
Check out my Patreon if you want 100+ models, commercial licensing, and monthly model releases! Your support means the world to me and allows me to keep making models! LINK: Patreon Model Description: Here is the Brontosaurus model!…
BOM: 2x voron style M3 heatsets 2x m3x12 (same screws as everywhere on the ontos) Very self explanatory. v1.1 fixed printability on sling point Version for the new plunger tube is in the works.
Uses Ontos V2 hardware. Has no performance upgrades. Made to look like a Phantom from the videogame VALORANT. Not a perfect replica of in-game model, but has enough similarities with original design to be easily recognizable
The Impulse Ungineering Ontos "Buffer Tube" Sling Point is a simple adaptation of my Universal Buffer Tube Sling Point remix to fit the adjustable buffer-tube-ish style stock on the Impulse Ungineering. This low-profile sling mount onto…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
![Triceratops and Brontosaurus Dino Christmas Ornaments / Earrings [set 1]](https://media.printables.com/media/prints/1107604/images/8369076_a8e165a3-a744-40f2-acc0-d42e377bbb95_854914bf-5fd0-404d-b69d-12a2268fd46d/dino-ornament-th.png)
