Plunger tube for Ontos
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Referenced SillyButts Plunger tube design to create a variant for the Ontos.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 149
- Makes
- 3
- Views
- 1,140
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Referenced SillyButts Plunger tube design to create a variant for the Ontos. 150mm long and OD of 35mm ID (with the plastic insert) is 32mm. Works great!
I have tested it and barely noticed a drop in FPS compared to the aluminum tube.
I would print the tube at a .28 layer height for strength and speed of print -but you don't have to.
For the insert, make sure its .20 layer height, so it ends up being .40mm thick. Also print on a SMOOTH plate, as this is what the rubber o-ring will be riding on. Smooth is key!
To assemble, Roll up the insert with the smooth side facing in, insert it in the tube. Lube up with a bunch of lube.
I have included the step file. This is my first time designing something like this, so let me know if i can make any changes! Also report back to let me know if you are using it and it works for you too.