MTG Modular Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular bulk storage tower for MTG cards. May work for other TCG as well.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 52
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modular drawer system I designed for Magic the Gathering bulk storage, featuring a stackable tower design with a carry handle for the top. Each section of the tower is held together with a dovetail groove that has a push tab that locks it into place, same with the handle and base, There are detents in the housing that hold the drawers in place when carrying the tower so they don't fall out in transit. Drawers also have slots for dividers.
Files should already be in the correct orientation, only support required should be under the external dovetails and under the handle of the drawer.
Because the push tab and detents are in line with the layer lines it creates a weak point, so PETG is recommended for filament. Some PLA does work (most of my towers were printed out of PLA), but some colors seem to be more brittle than others so I included a strength test piece that's just the push tab.