MOS filler/blank plate for Glock Gen5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An MOS plate blank I drafted for another project, built for the Gen5 dual-stack Glock pistols.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 61
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Public Domain
Meticulously drafted this model using FreeCAD and a solid pair of calipers. This was originally made for the Glock 19 and only tested on that, but I believe MOS is the same on the 17 and 26, any dual-stack model that's Gen5.
Originally I used this as a base for another project from which I extruded additional geometry for my use case. Not one-to-one on the underside but it fits the slide nicely. Use this as a base for when you wish to make your own slide/optic attachments. Prints best upside-down.
Includes a 3MF PrusaSlicer project with these settings:
Generic PLA
0.2mm Balanced
15% Infill
No supports
Prusa CORE One, 0.4mm HF nozzle
Also includes a print file with the above settings.
Additional model files are included in other formats for you to modify and use.