MOS filler/blank plate for Glock Gen5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An MOS plate blank I drafted for another project, built for the Gen5 dual-stack Glock pistols.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
Meticulously drafted this model using FreeCAD and a solid pair of calipers. This was originally made for the Glock 19 and only tested on that, but I believe MOS is the same on the 17 and 26, any dual-stack model that's Gen5.
Originally I used this as a base for another project from which I extruded additional geometry for my use case. Not one-to-one on the underside but it fits the slide nicely. Use this as a base for when you wish to make your own slide/optic attachments. Prints best upside-down.
Includes a 3MF PrusaSlicer project with these settings:
Generic PLA
0.2mm Balanced
15% Infill
No supports
Prusa CORE One, 0.4mm HF nozzle
Also includes a print file with the above settings.
Additional model files are included in other formats for you to modify and use.