Stackable Gridfinity Solder Holder 2x2x12 Full Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stackable 2x2x12 Gridfinity Solder Holder Bin for up to 1kg spools
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stackable 2x2x12 Gridfinity Solder Holder Bin. It can carry up to 1kg spools. There are a lot of other holders but most of them did not work well in my case. This model can be closed using a lid (i.e. if you use in a case) or you can stack other bins on top. Nothing will reach into the space of the neighboring bins.
The shaft model is from the original model. There is a standard 14mm shaft (fits most spools) and a split 10mm shaft for smaller spools.
Print in any material. Bin can be printed without supports. The shaft needs some small supports on the bottom.
Variants:
Normal spools (above 14mm diameter):
- 1x gridfinity_solder_holder_2x2x12
- 1x gridfinity_solder_holder_unibody_shaft
Smaller spools (above 10mm diameter):
- 1x gridfinity_solder_holder_2x2x12
- 1x gridfinity_solder_holder_thinner_split_shaft_part1
- 1x gridfinity_solder_holder_thinner_split_shaft_part2
I included the FreeCAD model so you can customize it (i.e. use another gridfinity base bin with label/without magnets or whatever style you like).