Stackable Gridfinity Solder Holder 2x2x12 Full Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable 2x2x12 Gridfinity Solder Holder Bin for up to 1kg spools
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stackable 2x2x12 Gridfinity Solder Holder Bin. It can carry up to 1kg spools. There are a lot of other holders but most of them did not work well in my case. This model can be closed using a lid (i.e. if you use in a case) or you can stack other bins on top. Nothing will reach into the space of the neighboring bins.
The shaft model is from the original model. There is a standard 14mm shaft (fits most spools) and a split 10mm shaft for smaller spools.
Print in any material. Bin can be printed without supports. The shaft needs some small supports on the bottom.
Variants:
Normal spools (above 14mm diameter):
- 1x gridfinity_solder_holder_2x2x12
- 1x gridfinity_solder_holder_unibody_shaft
Smaller spools (above 10mm diameter):
- 1x gridfinity_solder_holder_2x2x12
- 1x gridfinity_solder_holder_thinner_split_shaft_part1
- 1x gridfinity_solder_holder_thinner_split_shaft_part2
I included the FreeCAD model so you can customize it (i.e. use another gridfinity base bin with label/without magnets or whatever style you like).