Clearance and Fit "Goldilocks" Gauge Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use a pin and an array of rings to determine the ideal 'Goldilocks' clearance required for cylindrical parts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
When designing a model with moving components I want to know the exact clearance required for my target behaviour. Sometimes I want the parts to move freely and can accept some jitter or precession, sometimes I want the parts to only move when pushed with significant friction. In any case I don't want to print the whole part 5 times to get the clearance just right.
Enter the Goldilocks Ring Gauge: A 3D printed post and a set of rings with sequentially increasing clearances.
.F3D Model Included!
Want different post size or clearances? Just change the parameters in the fusion 360 file. The embossed text, the holder itself and the rings are all parametric.
Prior to Printing!
I strongly recommend tuning your printer and filament to as close to true as possible prior to printing. Using a bambu lab printer complete the following calibrations, printing a calibration cube between each test.
Flow Dynamics Calibration
Filament Shrink %
Hole and contour compensation (only if necessary, this setting may change your model geometry!)
Print an XYZ calibration cube and verify that the X and Y axes are within 0.05 mm or better using callipers. In theory if the post and the rings both scale proportionally then the accuracy doesn't matter.