1 / 7
Držák do auta na telefon / Car Phone Holder — image 1
1 / 7

Držák do auta na telefon / Car Phone Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Praktický držák mobilu do výdechu autoventilace. Perfektně sedí na Google Pixel 10 Pro (testováno na KIA Ceed).

Rating
0 / 5
Likes
16
Downloads
69
Makes
0
Views
480
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

🚗 Držák na telefon do auta (do mřížky ventilace)

Praktický držák na mobilní telefon určený k bezpečnému uchycení do výdechu ventilace v autě.

🚘 Kompatibilita: Testováno ve voze KIA Ceed s telefonem Google Pixel 10 Pro.

📱 Místo pro kryt: Držák je dimenzovaný na telefon s ochranným obalem (modelováno přesně na Pixel 10 Pro s krytem značky Spigen).

🔌 Chytré nabíjení: Ve spodní části najdete otvor pro zajištění napájecího USB-C kabelu. Kabel stačí zafixovat šroubkem M3x6 a už vám nikdy nezapadne pod sedačku!

🛠 Upravte si na míru: V souborech najdete i zdrojový .f3d soubor pro Autodesk Fusion. Vnitřní rozměry držáku si tak můžete snadno přizpůsobit pro jakýkoliv jiný telefon nebo kryt.

Tiskové nastavení:

  • 🖨 Tiskárna: Original Prusa XL

  • 📏 Výška vrstvy: 0,2 mm

  • 🧵 Materiál: PLA HT110 (Pozn.: Díky HT variantě vydrží i vyšší teploty v interiéru auta)

  • 🧱 Výplň (Infill): 25 %



@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

🚗 Car Phone Holder (Air Vent Mount)

A practical car phone holder designed to be securely mounted onto the air conditioning vent.

🚘 Compatibility: Tested in a KIA Ceed with a Google Pixel 10 Pro.

📱 Case Friendly: The inner dimensions are designed to accommodate a phone with a case (specifically modeled for the Pixel 10 Pro with a Spigen case).

🔌 Smart Charging: At the bottom, there is a dedicated hole for securing your USB-C charging cable. Just lock it in place with an M3x6 screw, and you'll never drop your cable under the seat again!

🛠 Customizable: I’ve included the Autodesk Fusion source file (.f3d). You can easily adjust the internal dimensions to perfectly fit your specific phone and case.

Print Settings:

  • 🖨 Printer: Original Prusa XL

  • 📏 Layer Height: 0.2 mm

  • 🧵 Material: PLA HT110 (Note: The HT variant ensures it can withstand higher temperatures inside a car)

  • 🧱 Infill: 25%

Tags