1 / 4
Endless mirror frame for IKEA Sannahed
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For turning an IKEA Sannahed frame in to an endless mirror without the need to drill holes into the frame pieces
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 32
- Makes
- 0
- Views
- 979
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You need to print four frame pieces in a dark, ideally black filament. I used PLA, which is suffient.
Additionally required hardware (links are examples):
- IKEA Sannahed frame
- Mirror tile 25x25cm
- Mirror film for window application
- 36x WS2812 single LED modules
- A microcontroller for controlling the LEDs (I used an Arduino Nano)
- 8x M3x20 countersunk head screw
- 8x M3 square nut
- 2m of thin wire to connect all the LEDs
Assebly is done as following:
- Put the mirror film on the front glass of your frame
- Place all the LEDs in one segment (and optionally glue them in)
- Solder them together but dont attach any wires to the ends of the assembled strip yet
- Repeat for all 4 segments
- Screw the segments together so they form a square
- Solder wires over the edges to connectthe strips but keep one corner open
- Attach longer wires to the free corner
- Put the glass in the frame followed by the LED inserts and the mirror tile on top
- Glue the Arduino to the tile with double sided tape
- Solder the free wires to the Arduino
- Program it with default strandtest or whatever you like most
If you like to put in some words, they are in a seperate Model: Word inserts for endless mirrors