1 / 4
Endless mirror frame for IKEA Sannahed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For turning an IKEA Sannahed frame in to an endless mirror without the need to drill holes into the frame pieces
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 985
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
You need to print four frame pieces in a dark, ideally black filament. I used PLA, which is suffient.
Additionally required hardware (links are examples):
- IKEA Sannahed frame
- Mirror tile 25x25cm
- Mirror film for window application
- 36x WS2812 single LED modules
- A microcontroller for controlling the LEDs (I used an Arduino Nano)
- 8x M3x20 countersunk head screw
- 8x M3 square nut
- 2m of thin wire to connect all the LEDs
Assebly is done as following:
- Put the mirror film on the front glass of your frame
- Place all the LEDs in one segment (and optionally glue them in)
- Solder them together but dont attach any wires to the ends of the assembled strip yet
- Repeat for all 4 segments
- Screw the segments together so they form a square
- Solder wires over the edges to connectthe strips but keep one corner open
- Attach longer wires to the free corner
- Put the glass in the frame followed by the LED inserts and the mirror tile on top
- Glue the Arduino to the tile with double sided tape
- Solder the free wires to the Arduino
- Program it with default strandtest or whatever you like most
If you like to put in some words, they are in a seperate Model: Word inserts for endless mirrors