Drum Lug - Fischer Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made for kick drum resonant head, intended for lower tension. But should be strong enough for another positions
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 1
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for the kick drum resonant head, intended for lower tension, but it should be strong enough for other positions too.
The dimensions are based on the original lug from a Brazilian brand called Fischer.
The drum itself dates back to 1988, and some parts have degraded over time.
Print settings:
Nozzle diameter: 0,6mm
Layer height: 0,28mm
Perimeters: 4
Solid Layers: 4 Top and 4 Bottom
Infill: 70% Adaptative Cubic
Material: PETG
Print orientation: place the larger and flatter side on the bed
Extra materials:
Heat-set inserts for M4 screws
Original lug nut from the original part
F3D file was avaliable, so can be modified easely