Quicrun 10BL120 to Arrma 223S Receiver Box Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model will allow you to attach a Hobbywing Quicrun 10BL120 ESC onto the receiver box on Arrma 223S 4x4 RC models
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 57
- Makes
- 0
- Views
- 295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This model will allow you to screw and ziptie a Hobbywing Quicrun 10BL120 onto the lid of the receiver box of the Arrma 1/10 scale 223s 4x4 platform.
The ESC uses two countersunk M2.5 screws from the bottom that, at least in my experience, do not hold tight enough in bashing. For this reason I also added some slots to add zip ties in either parallel or crossing patterns. I have found that one 5mm zip tie attached diagonally across the ESC has been sufficient to hold it down during some brutal 3S bashing. I made two sets of holes in caswe you want to flip the ESC around for some reason.
The adapter plate can then be screwed into the original ESC mounting holes in the lid of the receiver box right next to the servo using the original screws that came out.
For the shorter wheelbase models (Granite and Vorteks) there is not very much room, so the Hobbywing will be planted very close to the servo, but that has not given me a problem yet.
For the longer models (Big Rock, Senton, and Typhon) there is plenty of room to the motor, so you can modify the mounting holes if you want, but they will still work as uploaded here.