1 / 10
Sculpfun S9 Mounting feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting feet for Sculpfun S9. It provides an additional screw to block the Laser Engraver on the feet. Feet increase…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 151
- Makes
- 0
- Views
- 948
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Mounting feet for Sculpfun S9.
It provides an additional screw to block the Laser Engraver on the feet.
Feet increase high of engraver of 20mm (size used by Ortur honeycomb support https://amz.run/5Ba5 )
Needed materials:
- 16 x : M4 nuts
- 4 x : M4 x 10mm screws (to block the laser engraver)
- 12 x : M4 x (10 + width of the support) mm screws (in my case 30mm)
Print Settings
Printer:
Qidi X-Max
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.15
Infill:
30%
Filament:
Sunlu PETG / PLA
Orange
Notes:
Resolution can be increased to 0.2 as there are no difficult part to print
Category: Other