Panasonic BQ-CC63 (Magnetic) Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for mounting a Panasonic BQ-CC63 8 slots battery charger to a wall or a magnetic surface.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder for mounting a Panasonic BQ-CC63 8 slots battery charger to a wall or a magnetic surface.
Designed to works with these magnetic hooks from Amazon:
Neosmuk Black Magnetic Hooks (ø17mm)
https://www.amazon.de/-/en/dp/B09LQG23LM
Magnetic base:
ø17mm
6mm high
Thread part:
Tread: M4
Outer part diameter: ø6,50mm
Outer part high: 5,90mm
But can also be secured with normally screws to a wall. (Holes are ø4mm)
The charger can be screwed to the mounting plate, but also fit very firmly without securing it to the plate with screws.
Print settings:
Filament: PETG Recommended, PLA can be used.
Layer high: 0,20mm
Support: Recommended, support on build plate only, Support only needed for the holes.