1 / 7
Monofilament Spool Winder Adapter for Electric Screwdriver — image 1
1 / 7

Monofilament Spool Winder Adapter for Electric Screwdriver

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Forged to spool. Approved by ancestors.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

I designed this spool winder as optimal solution to use OEM spools in the dryer because printed spools can't handle too much heat. This is for Monofilament (Ukrainian brand) 0.75kg spools and other similar. Metal hex axle can be used - 6mm. PETG is recommended but PLA is alright. There's a 0.2mm sacrificial layer inside the hex hole. None supports required.

Axle and adapter tolerance 0.15mm. It should be more loose after first usage.

On practice spool dimension (distance between holes) may vary. I've tested this adapter, it fits tight or loose depending on the spool. Happy rewinding!

Tags