Pry Tool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.19 – €0.23 net (excluding VAT)
For file: pryingToolMK2_Bits_0.4n_0.2mm_PLA_MK4S_11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 11.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tool for prying off objects from your print sheet, replaceable tip.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 1
- Views
- 179
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Open Community License v1
Update 22.3.2026:
New improved version with a bit retaining mechanism, Also made the handle ~20mm longer
+ some other tip shapes
=============================
Pry tool for removing objects from printbed, no need to get in there with your greasy digits. Especially useful for thin and small objects that wont come off easily by bending the sheet.
The tip is replaceable.
Recommended filament: PLA
Depending on material the mechanism might be easy or difficult to release after printing. Remove the support and use a blunt tool to push the pin inwards. It might be advisable to print slightly cooler, 210 or 215C. But, Made for Prusa PLA+ worked very well @ 230C