1 / 2
Sculpfun S9 Frame Mounting Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting feet for the Sculpfun S9 Laser Engraver.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sculpfun Frame Mounting feet compatible with the following models:
S9
S10
S30
The feet slip on to the Sculpfun frame legs and can be secured using a single M5 bolt in each corner. I have included a recess for a nut.
Print three copies of the Main Leg and one copy of the Control Box Leg.
I printed using ABS but any strong filament will do.
Printed with 4 walls, 5 top and bottom layers and 30% infill.
Use 3.5mm Self Tapping screws to mount to the base board.