Counting matching models…
Like most 2nd gen S10 pickups and blazers, the plastic dash parts have broken into pieces. The recessed mounting holes on the underside of the steering column panel are a common break point. Rather than buy a whole new panel, I made these…
Adapter: Bosch PRO Battery → TS10 Soldering Iron Mount (Press-Fit, No Glue) This adapter allows Bosch PRO batteries to be used with a TS10 soldering iron mount . The design intentionally avoids adhesives and instead relies on a tight…
this part plugs in the height adjustment handheel to prevent it from rotating and thus prevent unwanted sawblade decrease
The Stand is a Hakko FH-300: LINK CNC Kitchen Heatset Inserts: LINK TS101 Iron: LINK I will admit the caddy doesn't have the strongest friction fitment, So feel free to use double sided tape to better adhere it to the Stand if needed. . .…
Over time I have refined the design (to some degree) as I needed. This is the case I use every day. Eventually I will probably find some flaw and redesign the thing, but until this this is what I am using The Lid in the packed files has…
Taking @fabernex_542538 designs and @BargainBin_1518988 re-design, I modified the newest @fabernex_542538 model (v2) to fit the magnet placement of Samsung Galaxy Tab S9 FE model and 10x2 round magnets. Should work also for Tab S9, S10 FE…
I wanted something which fits exactly in the cutout of the Dometic LS100 ventillation grille. As there is only little space between the cooling fins and the Ventilation grille at my caravan, I needed a solution for 15mm fans. While…
This is a phone case for the Samsung Galaxy S10e. I wanted to fix a few issues others i found had. The fingerprint sensor works, but the buttons are a kinda firm. Not too bad though. I haven't tested the fit of the audio jack but the…
i made this one thicker and it holds on to the soldering iron a lot harder for those who wish to just leave it on the iron while they work Print Settings Printer Brand: Printrbot Printer: Play Rafts: Doesn't Matter Supports: No…
Stand to hold a Uniden SDS100 Scanner upright, tilted back 15 degrees to aid in reading the display.
4/23/2026: UPDATED I made a new version that is much stronger and correctly lines as if it were in the original mount. This also works for the XTS-S10 Rally Car, and I assume the upcoming Short Course Truck. I wanted to get rid of the…
This is a completely redesigned case based on the standard parametric box that most designs use. One of the biggest issues I noticed with other cases is that the Pinecil display faces upwards — meaning if the case doesn’t close properly,…
The Berker K1 frames have a special rectangular format. Standard Berker adapter frames for 55mm square switches don't fit with the Meross switch cover. Therefore I needed to design a custom switch cover. The cover snaps perfectly into the…
This is a ⅓ scale, fully functional ACA Screamer S10. The siren is mostly tested. I would recommend putting something under the motor cover to hold it up. The motor covers are not the most strong. NOTE: THIS MODEL IS STRICTLY FOR 3D…
You must print two of the same file, one for the front one for the back of the switch.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
This mount is a combination of the Switch Rack Mount (Netgear GS105E) by Philip Hermes and the Raspberry Pi 2B/3B/4B/5B 10-inch Rack Mount by Maurício Pessoa. The two were combined to make use of the full 10-inch 1U space on the faceplate
Simple (Holder) stand for TS100 TS101 soldering iron
Material: ABS Layer height: 0.2 mm Infill: 15% (Grid) Supports: Tree supports, everywhere Bed adhesion: Brim
My vacuum broke, so I made a part to fix it. My wife still isn't impressed. You'll want to trim off the original material around the clip, leaving the top section. I also drilled a hole through the section at the hole in the print as well…
Speaker stand for Polka S10 with optinaonal wedge for tilting, variable height. I intend to put base into soil in potflower so it blends in living room. Maybe it would be usefull to take cables inside the tube, so it is hidden. I will see…
Ciao a tutti! Sono un creatore amatoriale che ha appena scoperto la magia della stampa 3D. In questo spazio raccolgo i miei primi passi: piccoli progetti nati per essere utili nella vita di tutti i giorni. Sto ancora imparando, quindi…
This is a vertical stand for the Mercusys MS105G network switch. One of the models has a 45mm wide base for a smaller footprint, and works better if attached to the surface using double sided foam tape. The other has a 60mm wide base and…
This padding / organizer replaces the top layer of foam in the Apache 4800 hard case (Harbor Freight) to hold a large tablet (i.e. Samsung Galaxy Tab 10) and a Polaris S100 high-precision GPS antenna. It also provides space for a battery…
The tolerances are a bit tight so you might need to sand it down a bit.
Bobbin plug replacement for Jumbo Bobbins on a Louet S10C spinning Wheel.
UPDATED This is the v2 of my dust collection for a Makita LS1013 miter saw. The previous version had you cut the kerf in the lid and the base was carpet-tapped to the saw. This version is screwed to the saw and has a kerf already in the…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
Original model: OLIMEX XDS100V3 Case - by: x3on I've made some changes which i found helpful, see the differences to the original model.
This is a full range speaker for the Dayton Audio RS100-4 chassis from their reference range, popular due to low distortion and linearity. Sound pressure level is in the lower range with 83dBA, but the Re of 4 Ohm makes it easier for the…
Keep your soldering iron and spare tips organized in a compact 1x1 bin. This is a MultiBin Top designed for the MultiBuild system. Compatibility The handle dimensions should be identical between generations, so these variants cover both:…
Remixed this to have a gridfinity base with magnet holes so i could have it inside the lid of the Modern Gridfinity Case by @unrepentantgeek To use it with the Modern Gridfinity Case you need: Snap in Window Frame by @Neppo_412215 my…
This is a holder for the large version of the Rugged Multipart Pinecil/TS100/TS80 Case (V2) . The rugged case simply snaps into the holder and sits on the upper hinge. This holder is compatible with the openGrid/multiconnect system by…
Print in PETG with at least 4 perimeters (0.4 mm nozzle). The fit is pretty tight, so you have to gently hammer it in place with a rubber mallet.
Add a nameplate to the rugged TS100 box I used PETG and superglued it to the top of the box
First insert the TS101 into the MB200, then clip the adapter onto the TS101 from the back and slide both together down into the bracket. The sleeve of the TS101 must be installed since it is the actual piece where the force is…
This is a 10" Tiny rack mount for the D-Link DGS1008p and the D-link DGS1005P. In the cover image, I only have the DGS1008P mounted, but I also tested the DGS1005p and it also fits the same on the rack. Fits the standard 10" tiny rack…
This is technically an unfinished design because I meant to create more parts- Some ideas I had: pieces to fill the holes in the bottom of the rack where you could hide a tracker, a connector piece that has extra holes so that it could be…
The lens bezel tool can be used independently with any standard bit driver. The switch tool require (4)M2 x 10
I found a few already online and I found that they sucked so I made one that works slick and is really stout. This adapter allows a full size steering servo to be used on the Rlaarlo Omni Terminator Truck and XTS S10 Rally Car.
Replacement battery cover for Mitutoyo ID-S1012EB Digimatic Indicator
TP-Link LS108P Wall Mounting Strap A minimal strap-style wall mount for the TP-Link LS108P 8-port switch. The device sits flush against the wall while the strap holds it securely in place with two standard drywall screws. No adhesive, no…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
My first model!! A new dust port to be able to connect a 50mm dust hose, at a 45 degree angel to the top port of the saw. This way the hose has a bit more freedom to move when the saw is turned.
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. This rotating 3D-printed mount allows you to easily attach and remove your Wurkkos TS10 to a headlamp headband. Specially designed curvature inside of…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Sofirn HS10 mount snaps right into the Skilhunt HB3 headband! Works with Sofirn HS10 series headlamp. The width of the mount is made to fit between…
Couldnt find any cases for the TS100 that would allow you to care a bunch of different tips so I designed my own. Just mirror it (along the x-axis, when placed flat) to get the top of the case. Used 8mm by 2mm magnets for the case corners…
Video link This was an attempt at making the Wurkkos TS10's button feel more like that of an "o-ring modded" Lumintop FW3A's button. It wasn't really all that successful, but it did result in a considerably stiffer, clickier button with…
10" Rack Shelf for Netgear GS108T & Wemos S2 Mini Relay Board. Relay board space can be fill with an empty shelf.
Holder for Miniware TS100 soldering iron, spare tips and optionally small flux bottles. No supports required.
use countersink bolts for permanent bond or doubletape
This is a top cover for this lightbox for Raleno PLV-S104, it is cut to house Savvasnyc film scanner base
What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…
Like most 2nd gen S10 pickups and blazers, the plastic dash parts have broken into pieces. The recessed mounting holes on the underside of the steering column panel are a common break point. Rather than buy a whole new panel, I made these…
Impreso en PLA sin soportes. Relleno: 15%. Se necesitan 6 tornillos M3x20. 2 para las bisagras y 4 para los cierres. // Printed in PLA without supports. Infill: 15%. 6x M3x20 screws are needed. 2 for the hinges and 4 for the closures.
You will need: 6x cylinder head screw M4x8mm 1x heat insert M4x5 Optional: 1x 3x5mm neodymium magnet The missing length on the holder in the photos has already been fixed in the cad, I have made the channel 5mm longer.
You need 1 additional washer with 2mm thickness and 25mm Diameter. Optional, put some weight under the holder, to ensure that it has a good stand.
Check description of original model here: https://www.printables.com/model/793696-rack-system-module-netgear-gs108ge If you like this model please hit the LIKE button. It helps me collect the prusameters. You may also liked some of these…
2 Bin variants, both are lower profile, one has walls high enough for stacking. I want to maintain the quick access dogma of gridfinity, thus I added finger windows, a facilitation of gesticulation defenestration while preserving…
I have two 8 port switches stacked and I wanted to them to hang them on my multiboard system. Due to room on my wall I preferred to have them stacked instead of next to each other, so I assembled the orginal brackets to an assembled one…
TS100 Soldering Iron Gridifnity Organizer. 1 x 3 x 3units tall. One version has a slot for the Allen Key and one version without. Included step files if you want to add magnets or modify. Did a color change at the text layer for some…
Threaded Heat Insert Tip Holder for iFixit TS100/CNC Kitchen Heated thread insert tips. Printed in PLA with a color change at Text Layer for some contrast.
Adapter: Bosch PRO Battery → TS10 Soldering Iron Mount (Press-Fit, No Glue) This adapter allows Bosch PRO batteries to be used with a TS10 soldering iron mount . The design intentionally avoids adhesives and instead relies on a tight…
I wanted to equip my TS100 Case with the inserts from jamie xu and Char to accommodate both my desoldering pump and my CNC Kitchen Heatset. Unfortunately, the TS100 collides with the stand holder due to the customisation of Char , so that…
This thing allows you to mount a 60mm fan inside the DS1054Z. I used a Noiseblocker PR-2. Now it is silent. One edge needs to be removed. Otherwise the fan pushes against a pin header on the main PCB. Print instructions Category:…
Design Intent This adapter includes under-voltage protection. Rechargeable lithium ion batteries can be severely damaged or completely destroyed if allowed to discharge too low. Milwaukee tools have internal electronics that signal the…
small alteration full props to the original disigner https://www.printables.com/model/575428-ts101-soldering-iron-case-print-in-place
Onshape link: https://cad.onshape.com/documents/669d8ab3ba28c9b4524ab2e6/w/aef33c5d4f0e49661ce8afa3/e/09eb626dace08d21ae3c6973?renderMode=0&uiState=670aa99a73e99d0f1216ec99 Based on…
Special bracket for the pencil soldering iron TS100/101 for the Fully printable Heat Set Insert Press https://www.printables.com/model/868742-fully-printed-heat-set-insert-press
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…
The TS100 soldering iron stand that I printed kept tipping over, so I made this hollowed out version with a plug, so I could pour in some silica sand for the additional weight. I also made the tip cleaner hole bigger (⌀68.5mm) You can…
For my simple Homelab, I needed a Rackmount for my old DGS-108 Switch (12 Ports, 1 Gbps). The print in in two parts : The support and the “ears” I used some super glue to fix them together. (Yeah, I used too much glue so I have white…
A fully refactored version of the original box, requiring less material to print, with included spare screw holders. The soldering iron clamp is removable, so when and if it breaks, you don't have to print the whole case. Change Log…
Design Intent This adapter includes under-voltage protection. Rechargeable lithium ion batteries can be severely damaged or completely destroyed if allowed to discharge too low. DeWalt tools have internal electronics that signal the…
Mount for the Vakaros Atals 2 you need 2 M4 Heat inserts like these: https://cnckitchen.store/de/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs also you need some duple sided tape for mounting it to the RS100 Print…
Will fit a phone of < 73.7 mm width and < 11 mm depth. Attaches to a mount with 3mm button head machine screws. Example shown using a kydex mount for a vehicle. Designed to slide in quickly with a usb cable attached. Camera sits above…
Hi, this is a commissioned model for my workmates from our electronics testing department. A nice case for their JTAG programmer pcb (OLIMEX TMS320-XDS100 v3+ JTAG Programmer). It is a two part case for use with 8x M3 inserts. The input…
My ‘97 S10 (2.2L) was missing a grommet on the air intake pipe that attaches to the upper radiator fan shroud. I removed one of the existing grommets and modeled and printed a replacement in TPU.
Securely holding the bearing @@ omgwowbbq
Supports the "Raspberry Pi rack case or rack cluster" thing found here: https://www.thingiverse.com/thing:2795195 Designed to sit over the top of a Netgear GS108 (but might work for other small 8-port network switches too). The holes in…
Adapter to allow you to use your TS100/101 with a JBC style soldering stand. May also enable it to work with other stands too.
Custom TS100 Soldering Station Upgrade your soldering setup with this well-designed station for the TS100 iron. Featuring a durable stand, a tip-cleaning section, and convenient cable routing, this station enhances your workspace's…
Basically I ordered a soldering iron from aliexpress, the cap fell down at some point of my time using it, so I made a new one. The soldering iron in question is this one: https://es.aliexpress.com/item/1005005291695011.html Print…
I wanted to use a cheap Voche Drill press that was sitting in the garage as a heat insert press, rather than spend loads on extra parts as seen in the many models on here. There didn't seem to be many adapters for a TS101 soldering iron,…
This is a small and lightweigt case for a TS100 soldering iron. It has enough space for 8 tips and a secure latch inspired by clockspring3D. For the hinges, you can use either 1.75 mm filament, or some wire. I used nails. I recommend ABS…
A very simple gridfinity storage module for a TS101 soldering iron and up to three tips. Comes with holes for magnets… It is a remix in the sense that the original model didn't fit my TS101, so I designed it from scratch.
Gridfinity tile holding a TS100/101/80/Pinecil rugged case with 3 hinges. I remixed this model in order to be able to store vertically my Pinecil XL Rugged Case for my TS100 and its accesories. I've included PLA and PETG plates plus test…
Gridfinity holder for the TS101! The TS101 is different compared to the TS100 in that it has an anti-slip cap. This cap increases the width of its tip. So if you want to use a TS100 holder, you have to remove the anti-slip cap each time…
Smartphone support fitting Samsung Galaxy S10+ and S24. Basic support to be assembled with some attach to use it in car or other place.
I was struggling finding an appropriate spot near my couch for my portable scanner. I designed this up in fusion for the radio and other storage for a can. Could probably scale up 1% for a little more room as the fitment with the radio is…
The original by vtrman does not have a big enough holder for the brass wool. This one will fit most dish scrubbers too. Added a small hole next to where the iron sits for the allen key. You will need one inch washer x1 one and a half inch…
Design Intent This adapter includes under-voltage protection. Rechargeable lithium ion batteries can be severely damaged or completely destroyed if allowed to discharge too low. Kobalt tools have internal electronics that signal the…
This is a blank plate for a kobalt table saw. There is a pre made cutout for the riving knife. Need to insert 4 - 5mm threaded inserts into the 4 holes along with 4 grub screws to level the plate. I used PETG on a 400 x 400 bedslinger.…
