TS100 / TS101 adapter for the Proxxon MB200 as heat set insert press
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to use the Proxxon MB200 drill press as heat set insert press with the TS100 / TS101
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
First insert the TS101 into the MB200, then clip the adapter onto the TS101 from the back and slide both together down into the bracket. The sleeve of the TS101 must be installed since it is the actual piece where the force is transmitted.
Print in PETG with
0.2 mm layer height
3 perimeters
2 mm top and bottom thickness
With these settings no infill should be required (solid piece).
This model is inspired by the Pinecil adapter made by @k8y3d.
If you find my designs useful, you might consider buying me a coffee. But of course, you don't have to - my designs are free and always will be.