Droop Gauge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Simple droop-gauge to measure the length of your shocks.
(which influences or is influenced by the droop).
Made a simple version as to-buy-ones can be expensive.
All you will need are an m3-bolt, length 10mm and the corresponding m3-nut (nyloc will suit best)
!!
The print-files are for printing with two colours, so 2 pauses for switching the filament.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Notes:
No difficult settings required but two things:
1: You need a color-change on layer 0.8 and 2.8 mm if you want the text, numbers to stand out.
2: be sure that your printer is tuned fine and allright to be able to print the numbers and
3: The print-files are for printing with two colours, so 2 pauses for switching the filament. stripes clearly.
How I Designed This
Fusion360
Category: R/C Vehicles