Elegoo Neptune 4 Max/Plus Fan Shroud V5 with Beacon/Cartographer mnt and Bowden mnt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan shroud mode adding better cooling, a bowden tube, eddy current sensor mounting, filament tensioner hole
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed fan shroud adding bowden Tube Mount, filament tensioner hole, and a Beacon or Cartographer mount! I kept the smaller front fan since I don't see the need for an even larger heat brake fan.
OP Info:
Offset values should be set to:
Max and Plus
x_offset: 0.
y_offset: 19.
Please use calipers to Measure and confirm these values at time of installation, the cad says they should be correct but may not be 100% accurate
Note: Due to Clearance Issues with the Z Uprights “Low Profile” configurations of the Cartographer and Beacon rev D are not recommended, “Standard” and “90 Degree” configurations Should have no issues if properly cable managed.
| With Aux Fan | Without Aux Fan |
Low Profile | NOPE | A VERY TIGHT FIT |
Standard | A TIGHT FIT* | HAS ROOM |
Right Angle | HAS ROOM | ROOM TO SPARE |
Recommend that the Aux Fan simply be removed as the ample cooling potential from the 2x 5015's make it redundant.
