Elegoo Neptune 4 Max/Plus Fan Shroud V5 with Beacon/Cartographer mnt and Bowden mnt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shroud mode adding better cooling, a bowden tube, eddy current sensor mounting, filament tensioner hole
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed fan shroud adding bowden Tube Mount, filament tensioner hole, and a Beacon or Cartographer mount! I kept the smaller front fan since I don't see the need for an even larger heat brake fan.
OP Info:
Offset values should be set to:
Max and Plus
x_offset: 0.
y_offset: 19.
Please use calipers to Measure and confirm these values at time of installation, the cad says they should be correct but may not be 100% accurate
Note: Due to Clearance Issues with the Z Uprights “Low Profile” configurations of the Cartographer and Beacon rev D are not recommended, “Standard” and “90 Degree” configurations Should have no issues if properly cable managed.
| With Aux Fan | Without Aux Fan |
Low Profile | NOPE | A VERY TIGHT FIT |
Standard | A TIGHT FIT* | HAS ROOM |
Right Angle | HAS ROOM | ROOM TO SPARE |
Recommend that the Aux Fan simply be removed as the ample cooling potential from the 2x 5015's make it redundant.