Hueforge - Itachi Uchiha - 4 Filaments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 4-filament Itachi Uchiha hueforge in different sizes.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
INFO
A 4-filament Itachi Uchiha hueforge in different sizes. The base has a thickness of 2 mm. The hueforge comes in the following widths:
200mm
220mm
256mm
The following filaments were used:
Elegoo PLA Black
Polymaker Polyterra Cotton White PLA
Polymaker Polyterra
Elegoo PLA Space Grey
Image source: https://wall.alphacoders.com/big.php?i=1328396
PRINTING
200mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x97.96mm in size
You may print at higher layer heights below the Base Thickness of 2mm
The Max allowed Thickness is 4.4mm and the Actual Thickness is 3.76mm
#000000 PLA Elegoo Black Transmission Distance: 0.1
#ac1a17 PLA PolyTerra Army Red Transmission Distance: 0.3
#818181 PLA Elegoo Space Gray Transmission Distance: 2.2
#e6dddb PLA PolyTerra Cotton White Transmission Distance: 2.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #28 (2.32mm) swap to Army Red
At layer #31 (2.56mm) swap to Space Gray
At layer #34 (2.8mm) swap to Cotton White for the rest.
220mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 220x107.76mm in size
You may print at higher layer heights below the Base Thickness of 2mm
The Max allowed Thickness is 4.4mm and the Actual Thickness is 3.76mm
#000000 PLA Elegoo Black Transmission Distance: 0.1
#ac1a17 PLA PolyTerra Army Red Transmission Distance: 0.3
#818181 PLA Elegoo Space Gray Transmission Distance: 2.2
#e6dddb PLA PolyTerra Cotton White Transmission Distance: 2.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #28 (2.32mm) swap to Army Red
At layer #31 (2.56mm) swap to Space Gray
At layer #34 (2.8mm) swap to Cotton White for the rest.
256mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 256x125.39mm in size
You may print at higher layer heights below the Base Thickness of 2mm
The Max allowed Thickness is 4.4mm and the Actual Thickness is 3.76mm
#000000 PLA Elegoo Black Transmission Distance: 0.1
#ac1a17 PLA PolyTerra Army Red Transmission Distance: 0.3
#818181 PLA Elegoo Space Gray Transmission Distance: 2.2
#e6dddb PLA PolyTerra Cotton White Transmission Distance: 2.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #28 (2.32mm) swap to Army Red
At layer #31 (2.56mm) swap to Space Gray
At layer #34 (2.8mm) swap to Cotton White for the rest.