Counting matching models…
And this cool one on the MiniFactory created by Happy Mask https://www.thingiverse.com/thing:2487189/files https://www.myminifactory.com/object/3d-print-anbu-black-ops-mask-naruto-19068 Print instructions Category: 3D Printing
itachi moon scene from naruto shippuden
Video on link below: https://www.youtube.com/shorts/nB45NfZYtHE A 2D Model of Itachi from the anime Naruto. Colored the model with permanent markers since I don't have multi material print. I put adhesive on the back of the model and…
Festool systainer cleats for old style systainers. Should be compatible with Hitachi and Makita systainers as well, but have only tested on Hitachi. Can be used to attach a custom MFT style board to top case. Beware the existing classical…
Gridfinity Boxes to store up to 12x 2.5 '' SSDs and up to 10x 2.5 '' HDDs. There are different Sizes of boxes for different amount of SSDs and HDDs to fit your needs. Sizes The first number set is the size of the Gridfinity Box. There are…
Hitachi / Hikoki Battery Changer Wall Mount requires longer screws to mount to charger screws and feet stick out a bit further then adapter but it still works
HIKOKI HITACHI Battery holder
itachi uchia funko pop style
A cosplay item that can be used as a Headband from Naruto
This is a bracket for holding the remote for TCL and Toshiba Roku TVs.They seem to be identical remotes, so I imagine this may work for other types of Roku TVs. It was designed to screw to the Headboard with sheetrock screws. Print…
A small design for a keychain. You can use my file for printing, there are all the swaps already included. For the chain, I used this . I also included a little hole where you can put on of this NFC-Tags to store data. Insert the NFC Chip…
Pannello decorativo ispirato a Itachi Uchiha, progettato per stampa 3D pulita e dettagliata. Linee nette, profondità a più livelli e ottimo contrasto luce/ombra per un effetto “cut-out” moderno. Ideale come quadro da parete o elemento da…
Print Settings Supports: Yes Resolution: 0.28 Infill: 20 Filament: PETG
Tamaño perfecto para llavero, no es aparatoso. Las partes estan bien diferenciadas para elegir bien los colores. Modelo impreso con PLA 870 negro y PLA 850 Rojo para mayor resistencia. Perfect size for a keychain, it is not bulky. The…
hey! i made this Itachi sharingan key chain, it uses multicolor filament change . Print this model twice and then glue the parts together for the best result! i printed this on ender 3 with 0.2 mm layer height and standard 0.4 mm nozzle.…
Step into the world of Naruto Shippuden with this exclusive Itachi Uchiha figurine , available as a carefully crafted .STL file for 3D printing. This model was hand-sculpted from scratch , ensuring that every detail — from the flowing…
Earring Pendant Itachi Uchiha Mangekyou Sharingan Category: Fashion
Attaches a 2.5" Rigid vac hose to the dust port on your Hitachi-Koki 12" sliding compound miter saw. Printed at 0.2mm layer height with 0.4mm nozzle.
Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. These were my settings and colors for my print…
While searching for an efficient way to store my cordless drill, I came across several solutions. However, none of them met my requirements, so I decided to design my own storage solution. This design is specifically created for the…
Hikoki/Hitachi/Metabo C10RJ to Bosch Universal Vac 15 vacuum port adapter Print in PETG
Disclaimer: No guarantees on whether this fits your particular saw, but it fits mine “good enough”. Since my print bed is not big enough to print a full insert in one piece, this is broken up into two halves with some joiner pieces. I've…
3D printable model of Itachi Uchiha, intricately designed to embody the depth and mystery of the character from the "Naruto" series. This model features Itachi in his Akatsuki cloak, with the red cloud pattern detailed across the fabric,…
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below. Manual print instructions Print at: 100% infill Layer height: 0.08mm First layer height:…
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
itachi scene made using hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Cream Transmission Distance: 2 PLA 123-3d orange Transmission Distance: 3.5 ( color code #eb860b)…
This friction fits my Hitachi C10FCE and my ShopVac hose. I have noticed there are some variations in different models of hoses. This should allow you to fit any type of round hose to the C10FCE, just change the measurements for the…
Wallmount/ under desk mount for Hikoki/ Hitachi Charger UC 18 YSFL Print Settings Rafts: No Supports: No Resolution: 0.3 Infill: 30 Notes: tight fit PLA works fine, use PETG or similar for more robustness Category: Tool Holders & Boxes
These are all for the Ridgid Shop Vac HD12000 which has 2.5 inch hose with clip attachment, and other Ridgid models with the same hose type. I created the female Ridgid Shop Vac end. I also combined this with attachments for the Hitachi…
While searching for an efficient way to store my cordless i9npact driver, I came across several solutions. However, none of them met my requirements, so I decided to design my own storage solution. This design is specifically created for…
Holder for Hitachi ACCU ( EB 1214S) to power supply of watter pump. Print instructions Printed version 2 - Printed with supports, PLA PM Version 3 modified (smaller holes, wider cable path, cutout for battery hook) not tested.
Kunai d'Itachi de l'univers de Naruto
Wall Mount Adapter for Hitachi Charger UC18YRSL
Design inspired by similar wall mount for Makita . Consists of two not equal elements. Right a bit more complicated. Both printed on side with no supports. I used 3 walls and 20% infill. Once you put both sides mark and predrill bottom…
Print Settings: Infill: (whatever you choose it doesn't matter) Adhesion is recommended but not needed
Wall Mount for Hitachi BSL1815 whit lock.
Adapter to connect a 1.25" O.D 1" I.D. Vacuum hose to a Hitachi C10FSH sliding miter saw. See picture of drawing for dimensions. Printed in PETG, 0.2mm layer height, 3 perimeters. Small end on print bed.
___________________________________________________________________________________________ In the previous episode... Using the innards of my redundant Hitachi Simpledrive USB HDD, I previously created a TPU case to hold the PCB and the…
for easy hanging of power tools such as drills, heat guns, blow guns and you can leave the bit in the drill chuck while it hangs on the wall
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black blue 11 red 15 white 27
A hook designed to mount a Hitachi magic wand to a wall or dresser. There are no holes in the back for screw-mounting, I used Command strips to stick it to my dresser. It stays up well with two medium-sized strips. Source code:…
I was given a Hitachi angle grinder and it was missing a carbon brushes cap
Reuse the speaker cone of Hitachi HTD-K210 surround system's speaker. Port tuned to approx 60 Hz. Materials: 450g filament for box @ 15% infill 80g filament for front panel @ 15% infill 12 x M3X20mm screws 12 x M3 nuts Any form of glue to…
A 2D Model of Itachi from the anime Naruto. Suitable for hanging in the car or on the wall. Naruto, Naruto Shippuden, Naruto Manga, Anime, Akatsuki
I was looking for an attachment that could help eliminate voids when filling 3D prints with concrete. I cloned the mechanism of Hitachis implementation of this tool from photos found online. Required hardware 4 x DIN 934 M3 Nut 4 x DIN…
It's an adapter for connect vacuum hose to the sander
Dust Adapter for Hitachi Miter Saw and Kobalt Table Saw to fit a Shopvac hose _____________________________________________________________ If you enjoy the models we have made and shared with the community, we encourage you to consider…
Wall mount for the 18V DV 18DL Hitachi Cordless Drill. I started with Slavish's design for a 12V Impact Driver mount and modified as needed. Thanks to Slavish for a place to start and a great idea. Drill hangs out of the bottom, so be…
This was mostly an experiment to see if I could design something like this in FreeCAD. Unfortuantely, I totally failed to take any photos of the finished product, OR the broken one! I did get a report from my neighbour that it worked…
This a replacement part for a Hitachi sliding miter saw model C 10FS. This may work on other Hitachi miter saws. The table inserts become damaged after much use and need replacement. The inserts are longer than the 3D printer bed, so they…
Here are brackets to screw your HiKoki battery charger to a wall or even upside down on a shelf. Use only the left and right bracket to mount one charger using 3 screws (3.5x50mm) for each brackets or use the middle bracket (in between)…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 200x97.96mm in size You may print at higher layer heights below the Min Depth of 0.52mm The Max Depth is 2.3mm and the Actual Depth is 2.3mm…
This is a picture of Itachi Uchiha (Fanart), better known from Naruto with his red eyes and black ravens, created with Hueforge. This Hueforge requires 4 colours and was created with the following swap instructions: Start with Black At…
I needed a new float chamber gasket for my Datsun 120Y (B210). The previous one had deteriorated too much and it was hand cut anyway so it had tears and poor holes for various jets etc. This new gasket was made by scanning the carb on a…
Alternative Design Side Handle For Hitachi C10FCG Compound Miter Saw. May also Fit: C12LSH, C12RSH, C10FSB, C10FSH, C8FB2, C8FSE, C8FSHE. I bought an open box special some years ago and was missing the handle among a few other things. Had…
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black blue 10 red 14 white 21
My main motivation was to replace the factory insert that I had melted while cutting metal with a cutoff wheel - having a zero clearance insert is just a nice side benefit. My print settings: PolyLite ABS 0.2mm layer height 4…
Holder for a Hitachi Air Conditioner remote (RAR-3U1, RAR-3U3, RAR-3U4, RAR-2P2, RAS-80YHA etc). For now I've just attached it using a 3M Command strip, although I'm sure countersunk holes could be easily added for more permanent wall…
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page. This is a perfect representation of Itachi Uchiha from Naruto Shippuden…
Protective plate for Hitachi cordless jigsaw. Requires 4 M5 machine screws. https://a360.co/2Gsb81T Print instructions Category: Parts Summary Protective plate for Hitachi cordless jigsaw. Requires 4 M5 machine screws.…
This remix adapts the original caddy from the HP series servers it was designed for to a Hitachi HUS (Hitachi Unified Storage) SFF 24 bay drive chassis. The drive bays are deeper than typical Dell or HP servers and hard to source (200mm).…
Replacement hand knob for Hitachi compound miter saw. Knob controls the fine tuning of the blade angle. Presses onto metal gear and fastens with existing screw. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports:…
Surface mount box for Hitachi WJ200 Remote Operator OPE-SRMINI. You will need a 90degree network cable to use this design
I had an old USB 2.0 500Gb Hitachi portable hard drive that I no longer had a use for. The hard drive had been taken out (it's easier to use a SATA/USB desktop dock for my occasional needs) and it was just gathering dust. But since I…
Detailed 3D printable Cyberpunk Version Of Itachi Uchiha From Naruto figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
Noticed a lot of the door handles in our excavators breaking and rotating around on their mounts so I designed a new one. Recommended to print from PETG, ASA, ABS etc. The ones in the photos are printed from recycled PETbottle filament…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Matte Lemon…
This is a temporary battery isolation switch for certain model Hitachi Excavators. It does run the RISK of breaking off in the battery isolator if layers aren't printed solid and great adhesion. If the model works for you find us online…
Got tired of having my wireless drill battery charger on my work bench so I made this bracket to be able to mount it on a wall or the side of my work bench. Print in place, no supports needed. Printed well. Used the fuzzy setting here for…
Have you any question? Please watch my video.
Detailed 3D printable Itachi Crows figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers Portfolio…
Adapter für einen Zyklon meiner Absauganlage in der Werkstatt auf einen Hitachi CV 400 Pro Staubsauber Durchmesser Zyklon 50 mm Durchmesser Adapter/Zyklon 50,5 mm Gedruckt auf einem Artillery Sidewinder X3 Plus Layer 0.2 Infill 20%…
This is a dust shoe for the Hitachi M12V routerC. The screws to attach to the lower base are 1/4-20" x 5/8" SHCS Long These are the magnets used, 10mm x 3mm and hot glued into the upper shoe.…
Use this holder to keep your drill out of the way but still in arms reach. This holder is meant for the builder who wants a little more table space or just wants a drill holder they can put anywhere. Please feel free to comment or give me…
mount to attach bosh 35Ø hose to a Hitatchi SV13YB Sander
Holds 4 of each Milwaukee M12 and Hitachi screwdriver batteries.
das ist ein OSVAC Absaugadapter für den Hitschi/Hikoki SV12SG Schingschleifer/Rutscher 3 perimeter 25% infill mit Suport zu drucken in PLA+ oder PETG
prints without supports
Busto di uchiha itachi fatto con AI. NO AMS. Buona stampa e buna pittura. :9
I designed this to replace a missing foot for my Hitachi miter saw stand. Printed using PLA with 100% fill in the final print to ensure stability under the weight of the saw and materials. Print with the dome down, with supports, and a…
Itachi's Mangekyo Sharingan Fidget Spinner uses standard 608 bearings. 2 Caps are needed.
stupid little safety button!! LOL printed in TPU (though anything should work fine) just pop in, tad keep it from falling out (right away anyway) Print instructions Category: Parts
Adapter Hitachi 12V for Lion (Type B DEKO)
he Hitachi SDT-1000M was a high-end stereo system introduced in 1979. The system included a turntable, an amplifier, and a pair of speakers. The turntable was equipped with a diamond cartridge and a high-quality tonearm. The amplifier had…
This is a holder for the 14.4V Hitachi battery
Detailed 3D printable Urban Streetwear Version Of Itachi Uchiha From Naruto figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
This model Replace Hitachi CJ18DSL tool change. I lost clear plastic guard and does not have its dimension so this 3D model may not fit the plastic guard. Print with at least 80% infill
Universal Adapter for Hitachi Hikoki Miter Saw to conect vacuum cleaner , dust bag ,dust extractor, external diameter 52,5mm
Descrizione: Un quadretto di Itachi Uchiha creato con l'ausilio del software Hueforge, dietro richiesta di un amico, fan del personaggio. Istruzioni di stampa: Nessun bisogno di supporto(anche se lo slicer può segnalarne la necessità) o…
I acquired an Hitachi TRK-510ER radio cassette player that was missing its Play button. It was non-function in other ways, so when it came apart I removed the buttons and modelled one in FreeCAD. Aside from the front/rear chamfers, I…
I was given a grinder, and the switch was off. The price of a new switch was about fifty euros so I said "why not try to model a new one".
Printer: Bambu Lab Carbon Print Head: .6mm Filament: PAHT-CF I made this file for my coworkers to help them out. The holder is for pocket or belt clipping so that you can have a free hand or be able to carry the drill with you while your…
INFO A 4-filament Itachi Uchiha hueforge in different sizes. The base has a thickness of 2 mm. The hueforge comes in the following widths: 200mm 220mm 256mm The following filaments were used: Elegoo PLA Black Polymaker Polyterra Cotton…
Print on left or right side with 100% infil. Category: Parts
Hitachi 960F Air Blower Nozzle This is a 3D model that converts the standard air blower on Hitachi's vacuum into a nozzled one. It also fits any hose with an inner diameter of 3.5 cm . Print Settings: Supports: None Infill: Any (not…
