1 / 2
Naruto - Uchiwa Itachi - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uchiwa Itachi clan, PrusaSlicer version
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 117
- Makes
- 1
- Views
- 814
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
Print at:
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
Filaments Used:
- Polymaker PolyTerra PLA+ Black
- Polymaker PolyTerra PLA+ Red
- Polymaker PolyTerra PLA Fossil Grey
- Polymaker PolyTerra PLA Cotton White
Swap Instructions:
- Start with Black
- At layer #10 (0.88mm) swap to Red
- At layer #13 (1.12mm) swap to Grey
- At layer #18 (1.52mm) swap to White for the rest.