Catalyst Machine Works - BangGod Frame - TPU Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are prototype TPU parts for the Catalyst Machine Works 6" Frame. This is under contstruction, so expect changes,…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
These are prototype TPU parts for the Catalyst Machine Works 6" Frame. This is under contstruction, so expect changes, nothing is perfect yet.
CRSFAntennaHolder_v20.stl:
Antenna Mount for 1x TBS Hand-Tuned CRSF in the middle and 2x TBS Pro LHCP for the Air unit on the sides.
=> After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed.
CRSFAntennaHolder_Mini.stl
Antenna Mount for 1x VAS Mini CRSF Antenna in the middle and 2x TBS Pro LHCP for the Air unit on the sides.
=> After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed.
CRSFAntennaHolder_DjiOnly.stl
2x TBS Pro LHCP for the Air unit on the sides, no Antenna in the middle.
=> After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed.
ledHolder_v3.stl:
LED Mount for this: https://www.catalystmachineworks.com/products/circular-rgb-led-board-sw316-an?_pos=10&_sid=5818da0e6&_ss=r
GPS_Mount_v4.stl:
Is only if you don't use a GoPro for this part: https://www.aliexpress.com/item/32917782967.html?spm=a2g0s.9042311.0.0.5e084c4dUY4j20
Print in TPU.
Category: R/C Vehicles