1 / 5
TBS Crossfire Micro Tx - Mount / Case for FrSky X-Lite — image 1
1 / 5

TBS Crossfire Micro Tx - Mount / Case for FrSky X-Lite

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I am a big fan of the work from https://www.thingiverse.com/bgill142. He came up with the absoluetly smallest possible…

Rating
0 / 5
Likes
4
Downloads
34
Makes
0
Views
535
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

I am a big fan of the work from https://www.thingiverse.com/bgill142. He came up with the absoluetly smallest possible case for the TBS Micro TX.

However, his design is hard to print if you don't happen to have an SLA Printer. Also, I am a fan of simple designs. I therefore came up with my own version, it's fully based on his work, so all cudos to @bgill142!

Changes I made:

  • Changed the box to flat design
  • Designed a flat top cover
  • Changed fixation of cover (you will need 4 M2 Screws)
  • Added some vent holes to allow air-flow
  • Removed the spot for the switch
  • Added a cut-out on the back. Print it without support, this results in a rough surface which allow the clue to really grab on to the part.

You have to do the same modifications as described in the original part. This design is not using the original TBS Button.

This part does not cover the slide in mechanical attachment piece. I used the attachment part from an old defective R9M Lite modul. You can also use the original cover.

Edit:

  • Added complete version for SLA prtinting.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2S

Rafts:

No

Supports:

No

Resolution:

0.15mm

Infill:

100%

Filament: Polymaker PC-Max Black


Notes:

Printed with 4 perimeters.

Category: DIY

Tags